Need some measurements on '10 351RLSA

[scootsk]

Hi

I have a 2010 Jayco eagle 351RLSA that is stored 120 miles away. I want to install a peel and stick backsplash. Could some one measure the distance between the counter and wall cabinets. I assume that it would be the same for all 2010 Jayco FW models.
If you have my exact model would you be so kind as to measure the walls from the fridge to the wall to the right of the sink, right to the edge of the moulding for the slide out.

I want to make sure I buy enough materials.

Thanks for any info offered.

Don

[Rolling Thunder]

We just took delivery of ours, but won't have access to it again until next Friday evening. If you don't have your answer by then PM me to remind me and I'll measure it up for you.

[rbarker46]

Ok, here is what mine measured. From the counter top to the bottom of the cabinets is 21 1/2". The distance from the Fridge wall to the corner trim is 74 3/8" and the distance from that corner trim out to the trim at the front of the counter is 23 3/8.
Hope this helps. I didn't measure to the bottom of the vent hood. Also don't forget the window over the sink.