Hey All, thanks in advance for any assistance. I have a 377RLBH and have lost all hot water pressure. Cold water pressure is good, but when I switch to hot, nothing. Any suggestions? I don't recall changing any valve settings, but that may be a factor. Thanks again -
__________________
2017 Eagle 293RKDS, factory ordered, lots of mods and upgrades. More than I can list.
2018 Ram 3500 crew cab long bed SRW diesel 6spd Aisin 4wd Tradesman.
B&W Ram puck 5th wheel
Line-X premium
Mopar wheel to wheel steps
+1 on the check valve! I had the same issue - hot water was a trickle. Pulled the CV and all is good. I'll need to put in a new one before I winterize or I'll have a tankful of antifreeze.
Where are you at with this? There's another post I commented on where I fixed this by simply draining the HWT and charging the system on the city water selection... opening my hot valves until all air was out and prolly putting it back to dry camp and it working like a champ.
Do not open your pressure valve on the HWT while filling.
CamperDude, thanks for your input. My 5W is on a hunting lease and I won't be about to troubleshoot for a 4 to 6 weeks when I am back onsite. I'll reply back with final resolution at that time. I appreciate your input!