Norcold--not so cold
Question, Anyone out there had any issues with a Norcold N611.
I would always go and light the fridge the day before we left for somewhere, start on gas so the box would get cold, then switch over to land line once we arrived.
Starting about a year ago it started getting harder and harder to light on gas, it would always take several tries before it would light. Jump forward to about 3 months ago now it will not light at all on gas. 120v works fine, I've replaced the burner bar and igniter.
Being a A/C guy at one time, I assume it uses the igniter as a ground source once the burner is lit, so I figured that would be the cheapest route. BUT guess what no luck, I can here the gas valve click, I suspect it is the board, more specific the igniter portion of the board. All I get is a click then it locks out my board has the two connectors, apparently the other only has one. The only thing the optic portion has is a on and gas light. If it faults they both flash constant for about 1 sec apart 1 sec on 1 sec off.
Am I nuts for thinking its the spark module on the board.?
Thanks,
__________________
Texas T
Arl, Texas
|