 |
03-29-2022, 03:13 PM
|
#1
|
|
Member
Join Date: Jun 2019
Location: Columbia
Posts: 33
|
North Point Brake Light bulb replacement
Anyone know how to remove the lens on the rear brake light/turn signal on a Jayco North Point? I need to replace burned out bulb.
|
|
|
|
03-29-2022, 05:49 PM
|
#2
|
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,780
|
Can you post an image of which light you have?
|
|
|
|
|
03-30-2022, 06:36 AM
|
#3
|
|
Member
Join Date: Jun 2019
Location: Columbia
Posts: 33
|
Brake light, 2019 Jayco North Point
20220330_072027.jpg
I don't know if this the URL for the picture or not. Please let me know.
|
|
|
|
|
03-30-2022, 10:49 AM
|
#4
|
|
Senior Member
Join Date: May 2018
Location: Deerfield
Posts: 482
|
Quote:
Originally Posted by rnelson1044
Anyone know how to remove the lens on the rear brake light/turn signal on a Jayco North Point? I need to replace burned out bulb.
|
I'm a little confused, because you state that you need to replace a burned out bulb. But in post #3, you state 2019 NP.
A 2019 would have LED lighting, no bulb to replace, the entire fixture would need replacing.
This post is for a 2018, I imagine that if it's not the same it's probably pretty close. Check post #19
https://www.jaycoowners.com/forums/f...hts-61336.html
Please advise if your unit is a different model year.
__________________
John & Donna
2024 GMC 3500HD AT4, CC, LB, Duramax, SRW
2021 Jayco North Point 377RLBH (Florida)
2019 Jayco Jayflight 28RLS (New York)
The latest government survey finds that 3 out of 4 people account for 75% of the total population.
|
|
|
|
|
03-30-2022, 12:12 PM
|
#5
|
|
Member
Join Date: Jun 2019
Location: Columbia
Posts: 33
|
Brake light unit
You are correct regarding it being an LED unit. And, yes, I need to remove the light unit but cannot figure out to do so. There are no visible screws. The link you sent was no help in that regard. Any ideas?
|
|
|
|
|
03-30-2022, 12:51 PM
|
#6
|
|
Member
Join Date: Sep 2019
Location: Cambridge
Posts: 92
|
Quote:
Originally Posted by rnelson1044
You are correct regarding it being an LED unit. And, yes, I need to remove the light unit but cannot figure out to do so. There are no visible screws. The link you sent was no help in that regard. Any ideas?
|
There are 4 holes that have plastic plugs in them. The plugs need to be removed and then the screws are located behind them to unmount the LED light from the trailer. Use a small sharp pick or knife and remove the plugs. You'll also have to break the silicone seal if they did that as well. When you replace it make sure you silicone them where they meet the trailer. This is the biggest reason them get moisture in them and then kill the LED's.
|
|
|
|
|
03-30-2022, 12:53 PM
|
#7
|
|
Senior Member
Join Date: May 2018
Location: Deerfield
Posts: 482
|
Quote:
Originally Posted by rnelson1044
You are correct regarding it being an LED unit. And, yes, I need to remove the light unit but cannot figure out to do so. There are no visible screws. The link you sent was no help in that regard. Any ideas?
|
Post #19 shows the light with plug inserts covering the mounting screws.
Is your light assembly similar?
__________________
John & Donna
2024 GMC 3500HD AT4, CC, LB, Duramax, SRW
2021 Jayco North Point 377RLBH (Florida)
2019 Jayco Jayflight 28RLS (New York)
The latest government survey finds that 3 out of 4 people account for 75% of the total population.
|
|
|
|
|
03-30-2022, 12:55 PM
|
#8
|
|
Senior Member
Join Date: May 2018
Location: Deerfield
Posts: 482
|
Quote:
Originally Posted by mavrick0
There are 4 holes that have plastic plugs in them. The plugs need to be removed and then the screws are located behind them to unmount the LED light from the trailer. Use a small sharp pick or knife and remove the plugs. You'll also have to break the silicone seal if they did that as well. When you replace it make sure you silicone them where they meet the trailer. This is the biggest reason them get moisture in them and then kill the LED's.
|
I'm guessing we were posting at the same time! 
__________________
John & Donna
2024 GMC 3500HD AT4, CC, LB, Duramax, SRW
2021 Jayco North Point 377RLBH (Florida)
2019 Jayco Jayflight 28RLS (New York)
The latest government survey finds that 3 out of 4 people account for 75% of the total population.
|
|
|
|
|
03-30-2022, 04:25 PM
|
#9
|
|
Member
Join Date: Jun 2019
Location: Columbia
Posts: 33
|
Hey, thanks much! I saw those 4 plugs but wasn't certain that's what they were and I feared screwing something up if I dug around with them. I tried just prying the lens off but felt that was not going to work. I appreciate your following through with this.
I was able to remove the plugs and, thus, the 4 screws, which solved my problem of removing the unit.
|
|
|
|
|
04-01-2022, 01:02 PM
|
#10
|
|
Senior Member
Join Date: May 2018
Location: Deerfield
Posts: 482
|
Quote:
Originally Posted by rnelson1044
Hey, thanks much! I saw those 4 plugs but wasn't certain that's what they were and I feared screwing something up if I dug around with them. I tried just prying the lens off but felt that was not going to work. I appreciate your following through with this.
I was able to remove the plugs and, thus, the 4 screws, which solved my problem of removing the unit.
|
Glad everything worked out for you!
__________________
John & Donna
2024 GMC 3500HD AT4, CC, LB, Duramax, SRW
2021 Jayco North Point 377RLBH (Florida)
2019 Jayco Jayflight 28RLS (New York)
The latest government survey finds that 3 out of 4 people account for 75% of the total population.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
