Pin box/bed rail interference
Have a 2013 315fbhs. TV is a 2013 ram 3500 cc long bed dually 4x4 with a b&w companion hitch. Also have an access tonneau cover. To get rig level I had to raise hitch all the way up and lower pin box way down and have 6" of tailgate clearance. Problem is that the oem extended pin box will hit my tonneau cover rails on a sharp turn. Center of kingpin to back of pin box is 28.5". Bed width between tonneau cover rails is only 55.5". Don't want to lose cover or go to gooseneck. Dealer will check with jayco Tuesday. Anyone have any other ideas. I worry that a shorter pin box will cause problems with tailgate when down to hitch up. Thanks
|