Seismic 4113

[Pvs9k]

Hello!

I posted about this earlier so my apologies.

I’m looking for a way to store my sewer hose on my seismic 4113. The underside is completely enclosed so mounting an underbelly tube style holder doesn't seem possible.

Anyone out there with a 4113 or an enclosed underside ever mounted one of these?

Thanks!

[atlantaM3]

I have a 4113. I ended up just keep mine in a large Costco bin in the bed of the truck, it has been much easier overall.

[theracqueteer]

I mounted two pvc fence posts under my 4113. Even though it is enclosed you can still mount hangers to the frame on each side. Depending on the type of hose and how much you want to carry, you may only need one post.

[Pvs9k]

Do you have any pictures of the hangers?

Also, when you are sitting on a site with septic, do you run a separate hose to your half bath outlet or just swap the main hose when it’s time to dump the rear tanks?

Thanks!

[atlantaM3]

I just use a Y connector, keep them both hooked up - Rhino Wye

[Topperace]

I too have completely enclosed underbelly with our NP383FKWS, mounted the hose tube to the exposed frame rail on each side...has worked fine for over a year now...

[theracqueteer]

Here are my pics. We have yet to use the 1/2 bath in the garage except to do the initial pid and to winterize. You will see I made a bracket for the fence posts but it could be done with perforated steel straps as well,

[Radar57]

Originally Posted by theracqueteer

Here are my pics. We have yet to use the 1/2 bath in the garage except to do the initial pid and to winterize. You will see I made a bracket for the fence posts but it could be done with perforated steel straps as well,

Great looking and functional mod. Never understood why they didn't provide provisions for the slinky. Love the bungee cord to hold the lid on.