|
Slide Issue (Schwintek) 351MKTS 2013
Had a issue with the Kitchen slide while we were on the road South. Got it in to a Repair shop and they found that it was a bad motor. The Motors that are in the slide now are a 300:1 gear ratio. I opted to purchase the 500:1 motors as replacement. The service Tech and I came to the conclusion that the lower geared motors would be better for the heavy slide. ( We have the optional double fridge) I called Lippert and was told that the 500:1 motors could be used and were compatible with the control box. Ordered them and after they are installed I will give an update ( hopefully this week). We have been living with the slide in which is doable but a bit cramped.
|
Linear Mode
