|
|
04-08-2020, 02:15 PM
|
#1
|
Member
Join Date: Nov 2019
Location: Prattville
Posts: 37
|
Slide Topper Installation
I have a 2015 Jayco Pinacle 38FLSA with 5 slides. It did not come with factory installed slide toppers. I have purchase Solera brand toppers. I noticed in the installation instructions the brackets are installed below the slide flange but in some pictures I have seen of factory installed toppers, the bracket appears to be installed on the flange. I think the factory installed ones are Carefree. Has anyone installed the Solera brand on my application and if so how were they installed.
|
|
|
04-08-2020, 06:26 PM
|
#2
|
Senior Member
Join Date: Apr 2019
Location: Bakersfield
Posts: 253
|
I can not be alot of help here but i have heard the installation instructions are confusing for Solara.
Maybe do a search
|
|
|
04-08-2020, 06:34 PM
|
#3
|
Senior Member
Join Date: Mar 2018
Location: Boiling Springs
Posts: 533
|
Do not install them below the flange. In time the force from the brackets will pull them out. On my 2019 Eagle, the factory mounted 2 slides on the flange and 1 slide below the flange. The brackets pulled the screws out of the fiberglass as it has no support behind it. Another good size warranty claim was processed for this mistake. Your directions should clearly state that you need to have a support to screw into behind the fiberglass. If you do have a brace, you can. On the 2019 the brace runs behind the flange.
Hope this helps.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
|
|
|
04-08-2020, 07:01 PM
|
#4
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,079
|
Quote:
Originally Posted by MDC
I have a 2015 Jayco Pinacle 38FLSA with 5 slides. It did not come with factory installed slide toppers. I have purchase Solera brand toppers. I noticed in the installation instructions the brackets are installed below the slide flange but in some pictures I have seen of factory installed toppers, the bracket appears to be installed on the flange. I think the factory installed ones are Carefree. Has anyone installed the Solera brand on my application and if so how were they installed.
|
I would contact JAYCO. I am 99% sure that on our 2015 they were below the flange.
https://www.jayco.com/site/contact/service/
__________________
DISNEY LOVERS
|
|
|
04-08-2020, 09:47 PM
|
#5
|
Senior Member
Join Date: Dec 2019
Location: Kingman, Az
Posts: 402
|
Quote:
Originally Posted by Grumpy
|
Ditto. I emailed them making sure ours has the proper backing to install them in our three slides and they answered me the next day. Now where's that stimulus check so I can get them ordered?
__________________
2017 Jayco Eagle 28.5RSTS
2016 Ram 2500 SB Longhorn 6.7 4x4
5th Wheel Prep/Auto Level
Andersen Ultimate w/Andersen Bed Shaft
|
|
|
04-09-2020, 06:39 AM
|
#6
|
Member
Join Date: Nov 2019
Location: Prattville
Posts: 37
|
Quote:
Originally Posted by Grumpy
|
Thanks. I sent the requested information to Jayco using the link you provided. I appreciate your help. I have a few other things I want to improve as well and I may have questions. This site is a great resource.
|
|
|
04-09-2020, 08:38 AM
|
#7
|
Senior Member
Join Date: Dec 2019
Location: Kingman, Az
Posts: 402
|
From what I have read some complain their dealer mounted them too flat so water pools up on them. I will make sure ours are at a slight angle when I install them. I found this pic of a Jayco North Point and both toppers are mounted below the flange...
__________________
2017 Jayco Eagle 28.5RSTS
2016 Ram 2500 SB Longhorn 6.7 4x4
5th Wheel Prep/Auto Level
Andersen Ultimate w/Andersen Bed Shaft
|
|
|
04-09-2020, 08:44 AM
|
#8
|
Member
Join Date: Nov 2019
Location: Prattville
Posts: 37
|
Thanks. I agree it would be better to have the increased slope. I appreciate the pictures.
__________________
2015 Jayco Pinacle 38FLSA
2019 Ford F350 6.7 SRW 4WD LWB
|
|
|
04-09-2020, 08:49 AM
|
#9
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,851
|
I don't see how either of those could be mounted on the flange. They would tear themselves up from wind flapping while traveling.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
04-09-2020, 09:23 AM
|
#10
|
Senior Member
Join Date: Dec 2012
Location: Southern Indiana
Posts: 3,208
|
Quote:
Originally Posted by norty1
I don't see how either of those could be mounted on the flange. They would tear themselves up from wind flapping while traveling.
|
X2, both of mine are below the flange.
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
|
|
|
04-09-2020, 09:43 AM
|
#11
|
Member
Join Date: Nov 2019
Location: Prattville
Posts: 37
|
Thanks.
__________________
2015 Jayco Pinacle 38FLSA
2019 Ford F350 6.7 SRW 4WD LWB
|
|
|
04-09-2020, 03:57 PM
|
#12
|
Senior Member
Join Date: Mar 2018
Location: Boiling Springs
Posts: 533
|
All 2019 and 2020 eagles are mounted to the flange.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
|
|
|
04-09-2020, 04:06 PM
|
#13
|
Senior Member
Join Date: Dec 2019
Location: Kingman, Az
Posts: 402
|
Quote:
Originally Posted by RipinSC
All 2019 and 2020 eagles are mounted to the flange.
|
You had me curious, so did a quick search and found this 2019 Eagle and yep, mounted on the flange. Looks like it may be a larger flange than previous years but hard to tell...
__________________
2017 Jayco Eagle 28.5RSTS
2016 Ram 2500 SB Longhorn 6.7 4x4
5th Wheel Prep/Auto Level
Andersen Ultimate w/Andersen Bed Shaft
|
|
|
04-09-2020, 04:12 PM
|
#14
|
Senior Member
Join Date: Dec 2019
Location: Kingman, Az
Posts: 402
|
Yet here is the larger slide of the same fiver on the opposite side, and it is under the flange. Go figure....
__________________
2017 Jayco Eagle 28.5RSTS
2016 Ram 2500 SB Longhorn 6.7 4x4
5th Wheel Prep/Auto Level
Andersen Ultimate w/Andersen Bed Shaft
|
|
|
04-09-2020, 04:21 PM
|
#15
|
Senior Member
Join Date: Mar 2018
Location: Boiling Springs
Posts: 533
|
That is how they mounted mine on the same slide. That is the one that pulled out of the fiberglass and destroyed the topper. Maybe Jayco needs to train the installers at the factory on how to mount the brackets. The 2020 has the brackets already mounted to all flanges. Just mounting the brackets into 1/8” thick fiberglass side wall will not hold anything.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
|
|
|
04-09-2020, 04:28 PM
|
#16
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,079
|
Quote:
Originally Posted by SeventyGTX
You had me curious, so did a quick search and found this 2019 Eagle and yep, mounted on the flange. Looks like it may be a larger flange than previous years but hard to tell..]
|
Quote:
Originally Posted by SeventyGTX
Yet here is the larger slide of the same fiver on the opposite side, and it is under the flange. Go figure....
|
Are the flanges the same size? The driver's side look wider, but it could be the picture.
__________________
DISNEY LOVERS
|
|
|
04-09-2020, 04:28 PM
|
#17
|
Senior Member
Join Date: Dec 2019
Location: Kingman, Az
Posts: 402
|
Quote:
Originally Posted by RipinSC
That is how they mounted mine on the same slide. That is the one that pulled out of the fiberglass and destroyed the topper. Maybe Jayco needs to train the installers at the factory on how to mount the brackets. The 2020 has the brackets already mounted to all flanges. Just mounting the brackets into 1/8” thick fiberglass side wall will not hold anything.
|
Did they originally install yours on the flange like the first 2019 I posted above?
I emailed them about ours and all they said the backing is there since you could order toppers from the factory in my year, 2017. Didn't think to ask them were exactly to mount them. But pretty sure under the flange is a safe bet.
__________________
2017 Jayco Eagle 28.5RSTS
2016 Ram 2500 SB Longhorn 6.7 4x4
5th Wheel Prep/Auto Level
Andersen Ultimate w/Andersen Bed Shaft
|
|
|
04-09-2020, 04:47 PM
|
#18
|
Senior Member
Join Date: Mar 2018
Location: Boiling Springs
Posts: 533
|
Yes they mounted the LH side on the flange which is correct. They mounted the RH side below the flange on the side wall. My dealer told me he has replaced a couple other Eagles which pulled out of the side wall. Flanges are the exact same on all slides. I will try to post a couple of pictures
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
|
|
|
04-09-2020, 04:52 PM
|
#19
|
Senior Member
Join Date: Mar 2018
Location: Boiling Springs
Posts: 533
|
Sorry, can’t figure out how to attach pictures.
__________________
RipinSC
2019 Eagle FW 321RSTS
2015 GMC 2500 HD 6.0 Gas
|
|
|
04-09-2020, 05:02 PM
|
#20
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
SeventyGTX,
I know on my 2017 EagleHT 27.5RKDS, the flange on the bedroom slide was 6" wide whereas the flange on the living area slide was 4" wide. This extra 2" can be a factor on placement of the topper material track.
I had one bracket start to pull out on the living area slide. Upon further investigation, I found that the predrilled holes on the Solera bracket(s) were not drilled to "match" the Jayco backer. I had to drill new holes in the bracket(s) … if I remember correctly, the new holes were about 1/4" above the predrilled holes.
It wouldn't be a bad idea to drill a small "test" hole to ensure you are getting into the backer.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|