Those that have washer and dryer in there 5'er

[Annikins]

Thank you for the input! I went with the stackable units��

[Big1]

I don't know if I can put a stackable washer and dryer in mines. What are the dimensions of your stackable?

[USNMA1]

Originally Posted by Annikins

We have a Jayco 383FKWS ready for deliver mid-April. We are having a dishwasher installed pre-delivery and am considering a stackable washer & dryer and really need some guidance on brand and is it doable or even recommended. Has anyone any experience they can share with me about this possibility?

We had a modification done to accommodate the stackable. The dealer created a shelf to get the stackable high enough so the front loading washer door could fully open even with a king size bed. They also moved the large slider door up and modified the swinging door to a slider like the large door and that is now on the bottom. Jayco actually sent out a rep to look at the modification because it made more sense and may be using the design on next years model. We have the 2020 North Point 383FKWS also. Delivered to us in March.

[USNMA1]

Also let me know how the dishwasher works out.

[Big1]

Originally Posted by USNMA1

We had a modification done to accommodate the stackable. The dealer created a shelf to get the stackable high enough so the front loading washer door could fully open even with a king size bed. They also moved the large slider door up and modified the swinging door to a slider like the large door and that is now on the bottom. Jayco actually sent out a rep to look at the modification because it made more sense and may be using the design on next years model. We have the 2020 North Point 383FKWS also. Delivered to us in March.

Wow, do you have any pics of your setup?

[USNMA1]

I will take some tomorrow.

[Big1]

Okay good thank you, we are going to get one in our 321rsts this summer hopefully but I don't know if we want to go stackable or not.

[USNMA1]

Originally Posted by Big1

Okay good thank you, we are going to get one in our 321rsts this summer hopefully but I don't know if we want to go stackable or not.

Won’t let me upload the photos to this site.

[Big1]

Hmmm, are you uploading from your computer?

[USNMA1]

IPhone

[Big1]

Okay, you go like you do on your computer but with the IPhone the pics are in your gallery and it should download from there.

[USNMA1]

Been there tried that Big1. I think it’s an internet issue and no way to reduce size of photo on the iPhone

[Big1]

Hmmmm, I don't have a IPhone so I don't know but okay no problem and if you figure it out post it sir.

[USNMA1]

Shoot me an email and I will send them that way.

[norty1]

My iphone give me the option of : Original, Small, medium or Large.

Are you using TapaTalk or the JOF website?

[Big1]

Okay, when I get my fiver out of the shop for warranty work my plan is to do it myself, lol, I ask the dealer how much will they charge just to put in the vent on the side of the unit.

The guy told my $380 plus tax, that is insane so I have watch a lot of youtube video on how to install the washer and dryer combo. My question is, how well place is the sticker that they put in where the vent hole goes?

I have seen a lot of story of the factory not putting the sticker in the right place, I will still
drill a pivot hole first and I will drill to the first panel to make sure that there no wire or plumbing that my be in the way.

Also my plan is to get a stud finder to check first to see if any stub back there. Thank you guys I do feel confident on doing it myself now.

[AndyO]

Big 1, another option is to look at your unit from the outside on a cool morning, the studs will show up plain as day in condensation. Put a small mark at the edges, take pictures, then double check with stud finder. I'll be installing stackables next week in our 336FBOK. Good luck. BTW mine has NO place marked for vent install.

[AKRUEBBE]

Originally Posted by AndyO

Big 1, another option is to look at your unit from the outside on a cool morning, the studs will show up plain as day in condensation. Put a small mark at the edges, take pictures, then double check with stud finder. I'll be installing stackables next week in our 336FBOK. Good luck. BTW mine has NO place marked for vent install.

Don't think a stud finder will work with aluminum studs!

[AndyO]

Surprisingly it does, I've marked them in the morning and confirmed with the stud finder, I didn't think it would work either.

[Big1]

Wow, this is great to hear I will be checking this out when I get it back from the dealer. Yeah my do have a mark but from looking at some YouTube video I don't want to trust it.