I am currently trying to cut rubber pads from a 2" thick stall mat to park my 5th tires on for the winter and in between trips. It is in a storage lot that is gravel and every spring when I move it for the first time I have gravel indentations in the tires. Something tells me this is not good for the health of the tires. The lot is about 1 hour round trip from my house right now and I can't seem to get out there any time soon.
My question is: Does anyone that has a North Point 5th know what the distance is from outside edge of tire to tire. Need to know how long to cut the rubber pads to. I am think a width of 14" will work just fine, but it is the length I need.
Thanks
- Dan
__________________
2016 Jayco North Point 375 BHFS
schiguy, I have a 2017 Pinnacle and the distance should be the same however; I cut a 4 foot long 2x12 and cut on edge to an angle and I lay that down and back onto it. One board, one spot, one try, no assistance needed. Too easy. No need to cut four times. Just a suggestion, to each his own. Skidawg.