TV Audio

[Adh20]

We just purchased our first Pinnacle (2020 36KPTS), and were given the impression that the Tv was connected to the sound bar and surround sound. Turns out, only the stereo/dvd is. So we get awesome surround sound when listening to radio or watching DVD, but the rest of the time we can barely hear tv. Anyone know of this is normal? If so, is there a way to connect the Tv to the sound bar or surround sound?

[Iraqvet05]

Is there a headphone output on the TV and the same 3.5mm input on the sound bar?

[Bookemdanno]

It’s all going to depend on what outputs are on the back of the TV and if there are any additional inputs for the sound bar. We don’t watch many DVD’s...if it were me, I’d hook the sound bar directly to the TV. You still have overhead speakers for the stereo correct?

[Radar57]

We have a 2019 36FBTS Pinnacle that we got last year. When we did the walk through the TV did work through the surround sound system. When we went camping the first time I had trouble getting it to work and it was only through trial and error that I finally got it to work. If it is the same Furrion system it should work. I wish I could remember but I would need the remote in front of me and camper is in storage until the end of the month. I'm sure there are others that have encountered the same issue.

[Nathan S.]

Select the ARC mode on the stereo and wait about 5 seconds. Took me a couple trips to figure this one out.

[Adh20]

No, don’t see one...

[Adh20]

Thanks for the tips!