Tv lift in pinnacle

[cdjenn]

Does anyone have the manual tv lift in pinnacle that hesitates to come up when lever is pulled? I was wondering what to do if it doesn’t come up.

[robkelly]

Ours will hesitate occasionally and I've found that pushing down on it and/or jiggling it back a forth while pulling the lever helps release it. We also swapped out the junk Furrion TV that came with a Samsung that's a little heavier and as a result sometime have to "help" the lift raise the last few inches.

Planning on pulling the fireplace out this spring so I can get to the lift and lubricate everything to see if that helps.

[jasum]

Originally Posted by robkelly

Ours will hesitate occasionally and I've found that pushing down on it and/or jiggling it back a forth while pulling the lever helps release it. We also swapped out the junk Furrion TV that came with a Samsung that's a little heavier and as a result sometime have to "help" the lift raise the last few inches.

Planning on pulling the fireplace out this spring so I can get to the lift and lubricate everything to see if that helps.

Rob you can lubricate everything on the lift by raising tv. Doesn’t really help to remove fireplace........but that’s easy also.

[robkelly]

Originally Posted by jasum

Rob you can lubricate everything on the lift by raising tv. Doesn’t really help to remove fireplace........but that’s easy also.

Thanks Jack, and understood. Will be checking a few other things while back there too, just part of my normal spring routine.