|
09-17-2020, 09:22 AM
|
#1
|
Member
Join Date: Jul 2020
Location: Saint Paris
Posts: 37
|
Washer Dryer Help!
In a very short time this forum has been a major help to us as we prepare to cruise the country in our 2020 Eagle 317RLOK. Working on washer dryer install and looking at LG or Splendide. Upon measuring the prepped area, it appears that neither will fit unless the back panel of the closet is removed. Anyone know if this is the correct move?
|
|
|
09-17-2020, 11:24 AM
|
#2
|
Senior Member
Join Date: Aug 2018
Location: Lawtey
Posts: 286
|
We have a Splendide. It's definitely a tight fit and I ended up cutting a section out of the back panel and enclosed it to allow the vent hose to go between the interior/exterior wall. I would take a picture, but not going to remove everything Otherwise I found that pushing units back, crimped the exhaust hose.
Don't know if the pics help or not.
__________________
Bill K
2018 North Point 377RLBH, Roadmaster Comfort Ride, Dexter E-Z Flex Suspension, Flexair 21k Pinbox, Victron MultiPlus II 2x120v 12v, power distribution, solar controller, smart shunt, 1000w of solar panels, 4 Lifepo4 200ah batteries
2017 Ford F350 Lariat CC DRW LB 6.7, Air Lift 7500XL with Air Lift dual channel wireless
|
|
|
09-17-2020, 11:30 AM
|
#3
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,080
|
Why not contact JAYCO and ask if it's supposed to be removed?
__________________
DISNEY LOVERS
|
|
|
09-17-2020, 01:52 PM
|
#4
|
Senior Member
Join Date: Aug 2018
Location: Lawtey
Posts: 286
|
When the dealer installed mine they just pushed everything to fit which pushed the back panel loose exposing the inside of the nose and insulation. Although I was impressed with the amount of insulation back there it looked like crap which is why I opted to mod it.
__________________
Bill K
2018 North Point 377RLBH, Roadmaster Comfort Ride, Dexter E-Z Flex Suspension, Flexair 21k Pinbox, Victron MultiPlus II 2x120v 12v, power distribution, solar controller, smart shunt, 1000w of solar panels, 4 Lifepo4 200ah batteries
2017 Ford F350 Lariat CC DRW LB 6.7, Air Lift 7500XL with Air Lift dual channel wireless
|
|
|
09-17-2020, 04:18 PM
|
#5
|
Senior Member
Join Date: Oct 2016
Location: Saint Thomas, PA
Posts: 2,234
|
My 2017 Eagle 293RKDS barely fit. I also installed a leak pan.
Earl
__________________
2017 Eagle 293RKDS, factory ordered, lots of mods and upgrades. More than I can list.
2018 Ram 3500 crew cab long bed SRW diesel 6spd Aisin 4wd Tradesman.
B&W Ram puck 5th wheel
Line-X premium
Mopar wheel to wheel steps
|
|
|
09-17-2020, 06:22 PM
|
#6
|
Senior Member
Join Date: Jul 2019
Location: Bowmanville
Posts: 248
|
We used a combo, splendid , and it fits great with no need to vent
|
|
|
09-17-2020, 06:26 PM
|
#7
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,080
|
I just looked at the specs and it's 22 5/8 to the front of the door. So as Earl said it will be tight, but it will fit.
__________________
DISNEY LOVERS
|
|
|
09-17-2020, 11:24 PM
|
#8
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,539
|
Mines fit and yes it was very tight but it's in.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
02-19-2021, 06:32 AM
|
#9
|
Junior Member
Join Date: Feb 2021
Location: Eustis
Posts: 3
|
Hi Big1,
1.) did you have to cut any wall surface out behind the unit for the vent?
2.) How long does it take to dry a load of clothes with that unit (looks like the 2100XC)
3.) are you happy with the unit, any problems, would you buy again?
Thanks
|
|
|
02-20-2021, 01:21 PM
|
#10
|
Junior Member
Join Date: Aug 2020
Location: Beaver
Posts: 2
|
We have a 2020 317RLOK. I installed a Splendide 2100xc into that exact same cabinet. It for without issue and I did not do any modifications to the rear panel. The dryer vent is located on the left side of that cabinet which is the deeper side. I ended up taking the dryer vent out of the back of the unit and then up and over the Splendide and exhausted out the side. It is a very tight fit, but it will work.
Let me know if you have any other questions.
|
|
|
02-20-2021, 05:49 PM
|
#11
|
Junior Member
Join Date: Feb 2021
Location: Eustis
Posts: 3
|
Wash/Dry time
Thanks a lot JustAiks! I'll do the same. Curious as to how long it takes to wash and dry a load of clothes?
|
|
|
02-21-2021, 06:09 PM
|
#12
|
Junior Member
Join Date: Aug 2020
Location: Beaver
Posts: 2
|
It depends on how full you load up the washer. I would say on average about 30 minutes to wash and about 90 minutes to dry. So about 2 hours. If you really load it up, it’s going to take longer.
|
|
|
02-21-2021, 07:07 PM
|
#13
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,539
|
Quote:
Originally Posted by JustAiks
We have a 2020 317RLOK. I installed a Splendide 2100xc into that exact same cabinet. It for without issue and I did not do any modifications to the rear panel. The dryer vent is located on the left side of that cabinet which is the deeper side. I ended up taking the dryer vent out of the back of the unit and then up and over the Splendide and exhausted out the side. It is a very tight fit, but it will work.
Let me know if you have any other questions.
|
Oh, okay I see what you are talking about now, wish I would have seen that before I install mines but it's it there now I glad it work out.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
02-21-2021, 07:10 PM
|
#14
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,539
|
Quote:
Originally Posted by JustAiks
It depends on how full you load up the washer. I would say on average about 30 minutes to wash and about 90 minutes to dry. So about 2 hours. If you really load it up, it’s going to take longer.
|
X1, what JustAiks said we go out for about a few days but on our long trip which will be about 2 to 2 1/2 weeks we get ready to go so where so we put a load of light clothes in and walk away, about time we get back they are usually done.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
06-26-2021, 08:21 AM
|
#15
|
Senior Member
Join Date: Sep 2019
Location: Longs
Posts: 1,484
|
Quote:
Originally Posted by Waterfalling
Thanks a lot JustAiks! I'll do the same. Curious as to how long it takes to wash and dry a load of clothes?
|
I know this is a few months old.
According to the manual there is only one cycle that is less than an hour for wash only. Then you need about an hour to dry.
|
|
|
06-26-2021, 09:43 PM
|
#16
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,539
|
Yes it does take a while to dry we just put some clothes in and walk away and come back and they done, it beat going to some of the shady laundry mats.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
06-27-2021, 05:32 AM
|
#17
|
Senior Member
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
|
Quote:
Originally Posted by Big1
Yes it does take a while to dry we just put some clothes in and walk away and come back and they done, it beat going to some of the shady laundry mats.
|
I agree.
__________________
Ed
KM4STL
2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|