Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-24-2017, 05:14 PM   #21
Senior Member
 
jasonmiddlebrooks's Avatar
 
Join Date: Mar 2017
Location: Hampton
Posts: 224
Quote:
Originally Posted by ROC-REQS View Post
Yup, mine too, it came from the factory with angle iron welded between both rear and front spring hangers as side-to-side cross braces.



But it didn't have a cross brace in the center between the two suspension hangers. So I decided to add a cross brace there as well.


That is what i did too. Wet bolts and cross brace in the center... Don’t think you can go wrong with that <$200 investment.


Sent from my iPhone using Tapatalk
__________________
Outta Here!

2012 RAM 3500 4x4 Laramie DRW - High Output 6.7L Cummins, Max Tow, FireStone Airbags, 60 Gallon Titan XXL fuel tank, Fully Deleted
2017 Jayco North Point 377rlbh with Kaut NV 2.0 bike rack
jasonmiddlebrooks is offline   Reply With Quote
Old 10-25-2017, 06:34 AM   #22
Senior Member
 
Join Date: Aug 2015
Location: kaml
Posts: 1,285
Quote:
Originally Posted by bdreinv View Post
Is this the up grade that seems to work? Thanks
Yes, just pick the part number in the chart that matches up to your trailer config. I used U012-016.
PlayersZ28 is offline   Reply With Quote
Old 10-25-2017, 09:04 AM   #23
Senior Member
 
Join Date: Dec 2015
Location: Arizona
Posts: 2,324
Suspension

Quote:
Originally Posted by PlayersZ28 View Post
When I replaced the center hanger I noticed that the bracket welded to the frame is nowhere near the width required for the CRE3000. The gap is 1/4" oversize and the metal sides bend inwards when you tighten the center bolt.

I'll look at welding in a square tube to give cross support next year.

I'd rather just drop out the entire suspension and go with the Moryde IS&Disc setup but it's pricey.
Its a shame owners have to shell out there own dollars to correct under designed suspensions. We were lucky on our 16 Eagle one month before warranty expired odd tire wear. Lippert agreed to replace to bad axles.Gotta jump through some hoops to get it done!Talked to some axle shops in Phoenix. Most use Dexter products.
Attached Thumbnails
Tombstone 09 (5).jpg  
bdreinv is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:34 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.