2018 Seneca tv hook up

[heatnman]

My 2018 has 3 TVs that route thru a box over the sink that’s supposed to help Sattelite blu ray and antenna routing signals. It does nothing. Will not read Sattelite or cable ,just tv antenna. No real instructions on setup. Anyone know where to look.?

[WinnieView]

Was your Seneca supplied with a manual in the owners manuals set for the "switch box"?
Can you get to the back of it to confirm wiring? Or the back of the TV to confirm wiring?

Can you post a few pictures?

[pconroy]

See if you can find a make/model on the switch box and google for a specific manual.

[RVermont]

Here is what is my 2018 m2. Is this what you are looking for?


This is the remote

And the very sparse manual


Not sure the specifics of your inputs however in my unit if I want to watch the dvd in the entertainment center I select button one or push the button on the actual unit to move the light to dvd. If I want to watch over the air tv in the bedroom I select tv 2 and cycle through until I get to position 2. Or 3 if I want satellite. Then use location three for the outside tv.

Good luck.

Sent from my iPhone using Tapatalk

[RVermont]

Looking at this further I am totally confused. As the only input is the hdmi from the Blu-ray. Then three outputs to the various tv. The actual input selection is done on the individual tv. Sorry if the last post was incorrect. Not really sure why they have this box unless it it needed to move the signal. I have put in an additional DVD player in the bedroom as having the player located in another room made it difficult to control.


Sent from my iPhone using Tapatalk

[Les7h]

On my 2016 I have to select HDMI1 ( the source button on the TV remote ) on the television to watch anything other than the over the air antenna ( TV on the source ) Les