Seneca ZX Radio nightmare

[SINAPU11]

Good morning everyone,

I have a 2006 Seneca ZX that I finally decided to upgrade my radio on . Easily pulled the dash apart and removed the old Magnadyne and figured the extra wiring was for the satellite radio.
So when I hooked up the new one and didn't have power to the radio I decided to remove the plugs that were attached to the old one and use butt connectors.
Well now I don't have any house power , nothing beyond the chassis works!
I did email jayco to try and get schematics ,has anyone else done this,or have any suggestions???

Thanks

[Grumpy]

Originally Posted by SINAPU11

Good morning everyone,

I have a 2006 Seneca ZX that I finally decided to upgrade my radio on . Easily pulled the dash apart and removed the old Magnadyne and figured the extra wiring was for the satellite radio.
So when I hooked up the new one and didn't have power to the radio I decided to remove the plugs that were attached to the old one and use butt connectors.
Well now I don't have any house power , nothing beyond the chassis works!
I did email jayco to try and get schematics ,has anyone else done this,or have any suggestions???

Thanks

The radio actually receives power from the house battery, that way you can use it when parked and the ignition is off. Check your house disconnect switch and the fuse at the relay. Also there are a couple fuses behind the driver's side kick panel that I would check..

Some of the wiring schematics are on the YAHOO SUPER C site so you may want to join that to access those.

https://groups.yahoo.com/neo/groups/SuperCrvgroup/info

[Grumpy]

Just had a thought. Did you try connecting the two red wires together? I know it would be dumb, but maybe they looped the power line.

[SINAPU11]

I probably did, but there were 2 green ones that were both hot.