Shock replacement M2, spacers

[RVermont]

I am getting new Koni Shocks next week and know I need to get 3/4 in i.d by 1/2 and 3/4 in id by 1 inch spacers but do not know what to order. Are these just 3/4 pipe cut to length or do I need a certain type of material. I was going to order everything from Hendersons but they are back ordered on the Shocks till early next year. I can get the spacers from them if needed but was wondering if I can get them locally.

[ChuckW]

Originally Posted by RVermont

I am getting new Koni Shocks next week and know I need to get 3/4 in i.d by 1/2 and 3/4 in id by 1 inch spacers but do not know what to order. Are these just 3/4 pipe cut to length or do I need a certain type of material. I was going to order everything from Hendersons but they are back ordered on the Shocks till early next year. I can get the spacers from them if needed but was wondering if I can get them locally.

I installed the Koni Shocks on my 2017, and faced the same dilemma. My solution was to visit my local steel supplier, and purchased a section of thick wall 3/4"id pipe. I fabricated them using a micrometer, a pipe cutter, and basic high school math.

[RVermont]

Thank you. That is the route I am going to take.

[Rino]

I got shaft collars from my local industrial supply. I can't remember the size but two worked great.