It’s time to flush my water heater in a 2015 Seneca, and I can’t figure out how to get at the intake and output lines at the back of the water heater. It’s a Girard first model in the last locker on the driver’s side. Somebody’s had to have done the flush, hope there is an easy way to get at it
Location: Kingman AZ and where our Seneca is today.
Posts: 3,118
Our 2015 has the Second Gen Girard tankless heater... Getting to the back of the heater.... There is no access that Jayco provided. If you want to flush (de-scale) your heater, you need to use the winterizing valves and pump the descaler(vinegar mix) into the water system with the winterization valves and out the low-point drain next to the water heater in the generator bay next to it. Did you get a owners manual? it explains it all.
__________________
Steve & Stacy with Jasper (Australian Cattle dog)
2015 Seneca 36FK
Custom 27' flatbed trailer hauling:
07 Toyota FJC & Yamaha Kodiak 400 ATV
Thanks, guess I should have done a little more reading. I do have the owner's manual, and makes sense now. Have been living in the Jayco for a little more than a year now, getting my barndominium built. Never dreamed it would have taken this long. Getting people to work, supply problems, permits etc. getting close though, thanks again
Linear Mode
