Water pump lights staying on

[PopRocks]

Good afternoon and Happy New Year. I have a 2015 Seneca and recently, while performing my routine black/gray tank dump, I heard and saw my water pump running, even though I had not turned it on. Flipping the pump switches had no effect. I disconnected the power to the pump, but both pump switch lights are staying illuminated, indicating to me that power is still running though one (or both) of the switches. Have any of you experienced this and, if so, how did you resolve the problem? Should I just replace both switches?

[Robbbyr]

My 2014 Seneca TS has 3 switches. By bathroom sink, in control panel by entry door, and in wet bay. Do you perhaps have 3 too?

[SloPoke]

Our 2015 36FK has three switches where Robbby said. One of them must be still left on, or one of them has failed. If you can't get the pump to stop, look under the right side of the wet bay, you will see the pressur switch of the pump with two wires that plug into the pump. Just pull one of them to shut down the pump.

[Tumbleweed44]

Yep, my 2015 also has 3 switches. One in the bathroom, one in the wet bay and one in the control panel box.
They all need to be turned off or the lights on all three will be on.

[PopRocks]

Wow! That was it! Turns out a flashlight I had in the control panel was blocking the view of the 3rd switch, and had moved sufficiently to turn that switch on. I love it when the answers are simple ones, even when they make me feel less than brilliant. Many thanks to you all. Happy New Year.

[Robbbyr]

Glad it was an easy fix!

[Tumbleweed44]

Thanks for reporting back in. We are all glad it was an easy fix.