BM Pro Leveling System Error
Have a question to see if anyone has a solution for an error we have with the BM Pro Leveling System. We have received the "excessive slope" error on the left rear jack. We have the Lippert 3.0 on our 2021 Jayco 321RSTS 5th Wheel - with the BM Pro system. I contacted Lippert and we did the following, manually raised and lowered the jack. Lowered it 6" and then hit retract all, the one jack didn't move. Then switched the wiring from left to right jack (rear) and the error issue followed the wiring (not the jack). So Lippert said it was BM Pro's issue not theirs. Does anyone know how to reset the system to clear the error - we feel that is all that needs to be done or is it possibly something faulty in the board? The system and rig are only 8 months old. Any info would be greatly appreciated - can't seem to reach anyone at BM Pro.
|