Jayco RV Owners Forum

Thread Tools Display Modes
Old 05-26-2014, 08:14 PM   #1
Junior Member
Join Date: Sep 2012
Posts: 6
2014 White Hawk frameless crank off track

The first time I opened the bedroom frameless window, it went out but not back in. The crank has two rollers on the end of a V and need to be in a slot on the window. The crank is pop riveted onto the sill. The V does not spread wide enough while it is attached to the sill to go into the slot. Do I have to drill out the pop rivet to fix it?

John in PA

PS I am an hour from the dealer so I was hoping to fix it myself.

jirvinepa is offline   Reply With Quote
Old 05-26-2014, 08:17 PM   #2
Senior Member
Join Date: Nov 2013
Location: KY
Posts: 289
Send a message via Skype™ to jamaddox
Be careful trying to fix. Ours was hinged in the middle but window slipped out of the hinge and shattered. Our dealer had to order the entire window. He will then have to remove the screws holding the entire window and just replace it. I hope it is under warranty as ours is a 2014
2017 F-250 Lariat
2016 Whitehawk 27DSRL
jamaddox is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 06:37 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.