32bhds - stove won't light, need help!

[LawnFlamingo]

Hey crew, we have gas flowing to the working outside kitchen and furnace, but no luck with the stove. Fairly convinced at this point it is the regulator for the gas line where the gas comes in under the burners. Tried to use compressed air to clean it out without luck.

Anyone had to fix this before? It doesn't look an easy way to just replace the part itself the way it is piped in under the stove top.

Thanks!

[sturgissteele]

I'm not sure how often a regulator fails. Problems with a propane gas regulator or appliance include lazy yellow or orange flames; a popping noise when turning a gas burner off or on; flames floating above burner ports; roaring noises from burners; flames at the burner air intake; flames spilling out of the burner; and heavy deposits of soot or rust on the burners. Linky

I would think LP is not getting to the stove. Maybe there is air in the line that still needs purged? Has this happened before?

[LawnFlamingo]

Hasn't happened before - disconnected the lines at the tank and at the stove, doesn't seem to be any obstructions when I use the air compressor on them. Possible flow problem? The line from the splitter may be a little kinked on the frame rail?

[sturgissteele]

Yeah, seems some more troubleshooting needed. Plenty of LP in the tank(s)? Valve opened fully? Sorry I can't be of more help.