Hi,
Can anyone tell me where the battery disconnect is on a Whitehawk 24mbh? Nothing is working in the trailer when it is connected to shore power or when on batteries alone. I'm wondering if we somehow hit the battery disconnect. Thanks!
As far as I know there is no battery disconnect on a 24mbh unless you had one custom installed. One thing that I have found (several times!) is that the motor on the electric tongue jack can blow the 30A fuse that is located just behind the tongue where the wires go into the trailer. If this fuse is gone, then you won't get 12V in the trailer. The fuse blows when you try to drive the motor too far. The fuse is in a little black rubber case by itself. I carry several spares now...
As far as I know there is no battery disconnect on a 24mbh unless you had one custom installed. One thing that I have found (several times!) is that the motor on the electric tongue jack can blow the 30A fuse that is located just behind the tongue where the wires go into the trailer. If this fuse is gone, then you won't get 12V in the trailer. The fuse blows when you try to drive the motor too far. The fuse is in a little black rubber case by itself. I carry several spares now...
Thank you so much. That is exactly what happened. We lost all power to the trailer and we couldn't figure it out. Eventually we found the blown fuse.