bedroom slide on 322fks

[evans27292]

i have an 08 eagle 322fks with king bed slide. we are having problems with slide coming in and hanging up.the bell stop is letting room come in too far and when you push the button to open we get click, click ,click.i have to back off on bell nut and loosen bell, then the slide will open .i have had it to two different dealers for adjustments.you have to be very careful not to over tork when closing.has anyone had this problem ? and if so what did you do to correct.

[imbudz]

Since you have an '08 it should be still under warranty, so I would get it back to the dealer to handle that. JMO

Bud

[Denise]

Gosh Evans.... Sorry you are having trouble with the slide. I don't have an answer, but I encourage you to let us know what you find out or how you resolve this issue. We have a slide (sofa), but currently have had no probs yet, but like to know when others do and how they dealt with it sorta for a "what if" kinda thing. Good luck!

[evans27292]

the factory called me and there sending the dealer a new motor and actulator .hope this solves the problem.

[Denise]

Good to know.... now hope you have an adept tech working on installing the parts for you. Man, I sure hope this resolves the problem and it doesn't remain an ongoing frustration for you. Good Luck!

[arl62001]

I find the problem with your Jayco bedroom slide interesting, i just took delivery on a new Jayco 322FKS, i am having trouble in getting it to OPEN rather than close, here that same click, click, click you describe....have been unable to open as yet, have a call into the dealer...during demo prior to having it deleivery, the slide workerd well?????

[slp053]

We have a 2010 322FKS and so far have had no problems with either slide. I do hear the click,click at the fully open or closed mode but try to release the slide button quickly.

Keep us updated. I will be closely watching. Thanks for the info.

Sam

[evans27292]

Originally Posted by arl62001

I find the problem with your Jayco bedroom slide interesting, i just took delivery on a new Jayco 322FKS, i am having trouble in getting it to OPEN rather than close, here that same click, click, click you describe....have been unable to open as yet, have a call into the dealer...during demo prior to having it deleivery, the slide workerd well?????

you ran room in too far its in a bind,loosen nut behind bell stop under slide,back bell one full turn back and room should open.reclose and just run room till it seals.turn bell stop toward frame until it touches.tighten up nut behind bell stop.you might have to redo if adjustmemt is off on bell stop.its not too hard ,be patient.