|
|
09-13-2021, 10:43 AM
|
#1
|
Junior Member
Join Date: Sep 2021
Location: Loveland
Posts: 3
|
Broken Shackle
Broken Shackle on tandem axle Flight, anyone have suggested upgrade? Shackle length? Smart owner would have measured before he left broken unit to go home :-(
|
|
|
09-13-2021, 10:56 AM
|
#2
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,740
|
What year and model tt do you have?
Decades ago broke a set outside Helena MT, local shop squeezed us in, and installed longer ones on each side (what they had in stock). Lifted the tt up a bit.
|
|
|
09-13-2021, 12:15 PM
|
#3
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
MW604,
Welcome to JOF
I have 2018 Jay Flight 24RBS, Dual Lippert Axles, 3,500lb rating each, leaf springs are 1 3/4" wide (sit on top of axles), w/15" aluminum rims. My 'equalizer' dimensionally looks very much like yours.
My shackle length is 3 3/4", and the hole centers are 2 1/4" (approx).
I plan to upgrade mine shortly with a 'wet bolt kit' which included heavy duty shackles. Haven't purchased the kit yet.
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
09-13-2021, 12:16 PM
|
#4
|
Senior Member
Join Date: Mar 2017
Location: Kingman, AZ
Posts: 1,949
|
I replaced mine with a Heavy Duty Wet Bolt Kit from eTrailer.
https://www.etrailer.com/dept-pg-Tra...ndem_Axle.aspx
__________________
Lee & Kathy, and our alarm clock Jake!
2017 Starcraft Autumn Ridge 266RKS 50 amp.
2017 Toyota Tundra Crewmax 4x4, 10-1-2021
|
|
|
09-13-2021, 12:21 PM
|
#5
|
Junior Member
Join Date: Sep 2021
Location: Loveland
Posts: 3
|
2017 Baja FLT 28 ft, tandem
|
|
|
09-13-2021, 12:29 PM
|
#6
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
[QUOTE=Route 66 Traveler;997876]I replaced mine with a Heavy Duty Wet Bolt Kit from eTrailer.
Which kit # did you order?
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
09-13-2021, 01:22 PM
|
#7
|
Senior Member
Join Date: Feb 2020
Location: Chillicothe
Posts: 511
|
Bob, I put on a kit from etrailer, that had a center cushion rocker and all HD shackles and wet bolts. If you want I can publish the part #. Jay.
|
|
|
09-13-2021, 01:23 PM
|
#8
|
Senior Member
Join Date: Mar 2017
Location: Kingman, AZ
Posts: 1,949
|
This one:
https://www.etrailer.com/p-K71-448-00.html
Mine has the longer equalizer. Did it over a weekend, one side on Sat, the other side on Sunday. I watched a lot of YouTube videos first. One showed using large C clamps to press in the new shackle bolts rather than pounding the in with a hammer. Pounding them in can bend the spring hangers. Also used a socket over the Zerk fitting to protect it when inserting the bolt using the C clamp. Before trying to remove the old shackle bolts I sprayed them with Liquid Wrench the night before to help in their removal. A couple were pretty difficult to remove. Good videos on eTrailer's website as well.
__________________
Lee & Kathy, and our alarm clock Jake!
2017 Starcraft Autumn Ridge 266RKS 50 amp.
2017 Toyota Tundra Crewmax 4x4, 10-1-2021
|
|
|
09-13-2021, 02:35 PM
|
#9
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Lee,
Quote:
Originally Posted by Route 66 Traveler
|
Appreciate the feedback......, started looking at options a few weeks ago.
Jay,
Quote:
Originally Posted by Jay2504
snip...... If you want I can publish the part #. Jay.
|
Yes, that would be great.
I put a wet-bolt kit on my prior TT and it worked out great. I've been spraying Lithium Grease into the cheap OEM plastic bushings on my present TT, but always had plans to upgrade.
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
09-13-2021, 04:33 PM
|
#10
|
Senior Member
Join Date: Feb 2020
Location: Chillicothe
Posts: 511
|
The kit that I put on my 24RBS, is part number:K71-652-00. It had cushion equalizer, and all the shackles, wet bolts, and bushings to do the job. The new shackles were very thick compared to the stock ones. The kit is for 5 5/8 bolt spacing which fit perfectly. Even though my unit is a 2020 model, my bolts and shackles were worn. I had to put on of the bolts in backwards so that the serrated shoulder of the bolt would grip the spring hanger. There are pictures in my mod thread. I think the kit is like $273 now. Please feel free to ask any further questions. Jay
|
|
|
09-13-2021, 05:45 PM
|
#11
|
Senior Member
Join Date: Jul 2014
Location: Silver Spring, MD
Posts: 1,795
|
I bought this when I replaced my leaf springs about a month ago. It was around $85 when I bought it. Money WELL spent. All new shackles that are TWICE as thick as the stock ones. And they are a standard size, 3 3/4". Replacement bronze bushings and wet bolts. They make it substantially quieter.
My Jayflight had a Cree3000 equalizer already, but its easy to upgrade if you are swapping shackles and adding wet bolts. Good luck. Its fairly easy to do, you just need to jack up one side of the trailer at a time to do it.
https://www.amazon.com/MORryde-UO12-...28195275&psc=1
|
|
|
09-13-2021, 06:29 PM
|
#12
|
Senior Member
Join Date: Dec 2020
Location: Spring
Posts: 928
|
Wet bolt kit. Replaced mine immediately after purchase. The stock shackles use plastic bushings that wear the bolts and shackle eyes, just like in your picture.
__________________
2016 Starcraft AR One 18QB
2016 Colorado LT 3.6L V6 Ext. Cab
|
|
|
09-13-2021, 08:03 PM
|
#13
|
Junior Member
Join Date: Sep 2021
Location: Loveland
Posts: 3
|
Thank you for all the feedback and suggestions, ended up ordering a Dexter Axle kit. ETrailer was super helpful on the phone, so just pulled the trigger. Not much of an e-commerce guy, so we will see. Two day shipping was what closed the deal. Will keep you posted! Thanks again!
|
|
|
09-13-2021, 08:07 PM
|
#14
|
Senior Member
Join Date: Sep 2020
Location: Beaumont
Posts: 120
|
Installed a wet bolt kit on our 2020 212QBW, before we even used it. We were going to wait and install the kit after our first season in it, then decided lets just do it now, very glad we did, because 2 of the shackles were missing the plastic bushing.
|
|
|
09-13-2021, 08:13 PM
|
#15
|
Senior Member
Join Date: Dec 2015
Location: Pennsylvania
Posts: 1,880
|
Did a heavy duty shackle and Wet Bolt kit back in June.
__________________
2012 Ford Expedition EL
2016 28BHBE, Elite and Thermal Packages.
Equal-i-zer 4-point Sway Control, Southwire 34930 Surge Guard 30A, Tire Minder TPMS A1A
(2) Yamaha EF2000iS Generators, Micro-Air EasyStart™ 364 (3-ton) Soft Start, Garmin RV 890, GoodYear Endurance ST225/75-15 Load Range E
|
|
|
09-14-2021, 01:34 AM
|
#16
|
Senior Member
Join Date: Dec 2020
Location: Spring
Posts: 928
|
I used the Dexter Wet Bolt Kit from Etrailer on my single axle TT. Awesome kit and heavy duty.
__________________
2016 Starcraft AR One 18QB
2016 Colorado LT 3.6L V6 Ext. Cab
|
|
|
09-17-2021, 07:14 PM
|
#17
|
Senior Member
Join Date: Aug 2019
Location: CG
Posts: 386
|
Quote:
Originally Posted by RAurand
Did a heavy duty shackle and Wet Bolt kit back in June.
|
That's what I'm talking about. I'm going for the Full MorRyde, Friends!
|
|
|
09-17-2021, 07:59 PM
|
#18
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Decided to go with the Dexter K71-359-00 Heavy Duty Suspension Kit for my twin axle TT......, received kit today.
Purchased source: https://www.etrailer.com/Trailer-Lea...71-359-00.html
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
09-17-2021, 08:56 PM
|
#19
|
Senior Member
Join Date: Mar 2017
Location: Kingman, AZ
Posts: 1,949
|
Spend some time watching the eTrailer installation videos, Also watch a few on YouTube. Some on YT are good, some not so good.
Connect your trailer to your TV for added security to keep the trailer from moving while jacked up. Grease all of the zerk fittings before you put the wheels back on and lower it to the ground.
Have a fun time while you’re at it…..
__________________
Lee & Kathy, and our alarm clock Jake!
2017 Starcraft Autumn Ridge 266RKS 50 amp.
2017 Toyota Tundra Crewmax 4x4, 10-1-2021
|
|
|
09-17-2021, 09:04 PM
|
#20
|
Member
Join Date: Feb 2020
Location: Manchester
Posts: 96
|
Wet Bolt installation
I too have the wet bolt kit & CRE3000 suspension on my Octane T-30F. I added the "X" factor braces to "hopefully" eliminate the broken spring hanger issue.
One thing I would remind those who are installing the wet bolt kit. Insure the "hole" in the wet bolt is not facing down when you install. If it is, it could get blocked by the brass bushing when the load is on the suspension & it will not take grease. As long as the hole is at 3 or 9 o'clock is best. The person I bought the camper from ordered it with this and several other upgrades. Point being about 50% of the wet bolts would not take grease due to the hole in them facing down. We had to lift the frame to get the weight off the suspension & rotate the affected wet bolts to correct the issue. Now they all take grease correctly. Just a tip if installing.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|