Broken Slideout

[redondo63]

I have a 2020 184 Baja and the slide out only goes out on one side when I tried to open it last time. I stopped and pulled it in after 1-3". Any ideas?

[ARoamer]

Not sure of your slide type, I'm assuming it's a slim rack. I recently had a nice chat with a service tech and he stated most of the issues he's seen with slim racks not working has been with the wiring to the slide motor being cut, broken, disconnected or damaged somehow. Said probably 9 times out of 10 it's the wiring.
Please post your findings, and good luck!

[Marcm157]

Definately need to know the type of slide you are asking about.

[klassic]

Find the slide controller and press button with a pencil 6 times and hold it on the 7th time until the blue and red lights start flashing.
Then you have around 30 seconds to open your slide in override.
See if that works

[SuckyFisherman]

I have the same trailer and the same problem. Do what Klasic said to get it to move. There is about 100 videos on you tube to show you how to get the trouble code and narrow down the exact problem.

Im my case the wire to the motor was getting pinched on the left side at the bottom of the slide

easy fix once you narrow it down