|
Chill and keep it simple and green
Sensors are a pain but, I learned that one can get and keep them clean this way: assuming you can dump before you break camp, fill 1/8 to 1/4 the capacity of your tank with 1/4 cup of full strength Simple Green. Then add about 1/4 of the tank with water. Drive home and if you can find a dump station, dump out and that’s it.
If you cannot dump before you break camp, after your dump
station, do the simple green and water deal. When you get to your site or a dump station in between, dump.
It might take 2 or 3 cycles of simple green water to clean your sensors but it will work AND it is safe for the environment . Bra, I’ve been doing this exact thing for 15 years and have never had a sensor issue.
|
Linear Mode
