Coleman-Mach Thermostat Wiring Help

[jrdpttrsn]

I have a 2013 26BH Jay Flight with a white analog Coleman-Mach thermostat. During PDI in March last year the furnace was working. During the summer I had an issue with AC and resolved it by replacing the factory thermostat wire nuts and fixing a broken wire connection in the AC access panel in the ceiling. Didn't think to check the furnace after getting the AC running. I replaced the wire nuts one at a time and don't think I mixed anything up, but today the AC works, but heat does not. Does anybody know the correct thermostat wiring?

What I have at the moment:

Four wire bundle in wall:
- White to Thermostat Gray
- Red to Thermostat Yellow
- Green to Thermostat Green
- Blue to Thermostat Blue

Single large gauge White wire in wall:
- To both blue wires

Two wire pair in wall:
- Red/White to Thermostat Red
- White to Thermostat White

[havnfun]

Check the thread "New Digital Thermostat." I believe it will give you the help you need for wiring. Good luck.

[jrdpttrsn]

After digging I found a wiring diagram in this thread.
Appears that I am wired correctly. 12v fuse is shared with refrigerator and fridge is working. Anything else I could check before trying to schedule for service.