COMPLETE NEWB - TV MOUNT 2019 Jay Flight

[Rodslinger]

Hello everyone. I know I have a TON to read but this is my second time out in the travel trailer. I purchased it new and thought it would be neat to get a tv for it. It has a really neat thin it can slide in and off of in the master room and I can move it to the same style mount to watch tv outside BUT the dining living room area has this -





WHat do I buy I can place there and continue to move the tv to the other two locations as needed? I would have thought they would have used the same setup as the main bedroom and outside.



Thank you in advance!

[norty1]

That must mark the mounting stud for a tv mount. Can you find the same one that's on your other locations and put it there? Do you have access to the antenna input?

[madmaxmutt]

Originally Posted by Rodslinger

Hello everyone. I know I have a TON to read but this is my second time out in the travel trailer. I purchased it new and thought it would be neat to get a tv for it. It has a really neat thin it can slide in and off of in the master room and I can move it to the same style mount to watch tv outside BUT the dining living room area has this -





WHat do I buy I can place there and continue to move the tv to the other two locations as needed? I would have thought they would have used the same setup as the main bedroom and outside.



Thank you in advance!

I think you answered your own question. You need to buy the exact same mount (that you didn't show pictured) as in the other room and outside.

[oldmanAZ]

Hello() to you (must be a Texas thing ) and welcome to the forum.

[madmaxmutt]

Why were these posts edited by @WVdusty ? This is kind of weird.

[oldmanAZ]

Originally Posted by madmaxmutt

Attachment 45814
Attachment 45815
Attachment 45816
Why were these posts edited by @WVdusty ? This is kind of weird.

Bet I know.
Your post had a typo - you left off the letter 'O' in hello.
I left off that 'O' in hello in my reply to be a smart@ss.

So not weird...
We've been 'busted' by the admin and WVdusty corrected our posts.

[madmaxmutt]

Originally Posted by oldmanAZ

Bet I know.
Your post had a typo - you left off the letter 'O' in hello.
I left off that 'O' in hello in my reply to be a smart@ss.

So not weird...
We've been 'busted' by the admin and WVdusty corrected our posts.

Yes, it's weird to have a forum admin change your wording. I didn't type the word hello, at all. I quoted the OP, who might have. A little too big brother for me. . .

[2edgesword]

If you're going to be viewing the television while it is flat against the wall you'll be limited to a size that would be double the length of the distance between the center of the wall sticker and the cabinet to the left in the picture. If you're going to mount an extendable mounting bracket you'll have more options.

[oldmanAZ]

Originally Posted by oldmanAZ

Bet I know.
Your post had a typo - you left off the letter 'O' in hello.
I left off that 'O' in hello in my reply to be a smart@ss.

So not weird...
We've been 'busted' by the admin and WVdusty corrected our posts.

Originally Posted by madmaxmutt

Yes, it's weird to have a forum admin change your wording. I didn't type the word hello, at all. I quoted the OP, who might have. A little too big brother for me. . .

Oops! My bad! It was the OP, not you.

[Rodslinger]

Well thank you to some - the rest, I guess this isn't the forum for me. I won't be asking any more questions. Lord forbid I'm in the middle of nowhere and just asking for advice and help.
Yeah it's a Texas thing - we're a bit nicer. Thank you again to those that had constructive things to say and attempted to help.

Adios.

[Regulator]

Originally Posted by norty1

That must mark the mounting stud for a tv mount.

In my 2018 Jayflight SLX 245 RLS it only marks a 5/8" block of plywood. Jayco sent me a diagram of the framing.

[oldmanAZ]

Originally Posted by Rodslinger

Well thank you to some - the rest, I guess this isn't the forum for me. I won't be asking any more questions. Lord forbid I'm in the middle of nowhere and just asking for advice and help.
Yeah it's a Texas thing - we're a bit nicer. Thank you again to those that had constructive things to say and attempted to help.

Adios.

Please accept my sincere apology.
It seems my attempt at humor when welcoming you to the forum went horribly wrong. Folks here, myself included, strive to be friendly and helpful. Apparently my reply was neither.

Before abandoning this site, please read some of the other posts and I believe you'll find good, friendly members with helpful information. Again, I'm sorry if I offended you in any way.

[mikegray]

Where on a 2014 Flight 26bh is the antenna booster?
Thanks, Mike

[29BHS ECO]

Like I answered in a previous post, I used a " Mount-it" LCD-CM211" $39.00 for a Insigna 21" 5 lb tv. I mounted it under cabinet that is at the left in your pic. The mount swivels and swings down. It ends up at eye level when watching, then folds up and swings out of the way when dining.

[madmaxmutt]

Originally Posted by Rodslinger

Well thank you to some - the rest, I guess this isn't the forum for me. I won't be asking any more questions. Lord forbid I'm in the middle of nowhere and just asking for advice and help.
Yeah it's a Texas thing - we're a bit nicer. Thank you again to those that had constructive things to say and attempted to help.

Adios.

LOL
Just getting back to this one. Well it seems the OP has left us, because of a typo he created making it a curse word. Tone and tenor on the Internet are what they are. Sorry, the answers provided and the method got in your way, of the good information provided. Better luck elsewhere for Jayco answers.