Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-16-2016, 10:22 AM   #1
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
Cut Andersens now what?

Cut them the max 4" and still do not fit between axles.
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 11:22 AM   #2
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 321
Which Jayco do you have that the levelers will not fit?

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 04-16-2016, 01:00 PM   #3
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
Quote:
Originally Posted by borninblue View Post
Which Jayco do you have that the levelers will not fit?

Sent from my SM-N910P using Tapatalk
J feather 22Y
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 01:15 PM   #4
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341


I tried just using one and pulling up onto it but when I pulled off it got jammed in between my two tires. I am so upset because now that I cut them I cannot return them and lost my money
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 01:23 PM   #5
Senior Member
 
Join Date: Sep 2013
Location: .
Posts: 580
It looks it should work fine if you tilt it a bit.

Instead of just pulling off, I'd ease off the same way I came on.
etex211 is offline   Reply With Quote
Old 04-16-2016, 01:25 PM   #6
Senior Member
 
Join Date: Sep 2014
Location: Blaine
Posts: 152
I am going to guess if your wheels were on level firm ground it would just fit. Your losing distance by that front tire being a little lower than the rear.
rabalin is offline   Reply With Quote
Old 04-16-2016, 01:25 PM   #7
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 321
I agree, tilt it up and then roll on it

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 04-16-2016, 02:34 PM   #8
Senior Member
 
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,970
You could also try rolling over it with the first tire, placing the second ramp, then rolling up onto both.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
bankr63 is offline   Reply With Quote
Old 04-16-2016, 03:02 PM   #9
Senior Member
 
Join Date: Dec 2011
Location: Upperco, Md.
Posts: 807
The problem with that tilting is the possibility of wedging when you com off. I would cut an additional inch off of the short one. If it creates too big of a jump to get the tire on it, take a grinder and flare the leading edge a little. That 4 inch business about maximum cut off is not etched in stone!!
Ela1948 is offline   Reply With Quote
Old 04-16-2016, 03:12 PM   #10
Senior Member
 
Join Date: Dec 2011
Location: Upperco, Md.
Posts: 807
Cut between the next set of holes in your leveler. Do not cut thru the holes. That will effect there physical strength.
Ela1948 is offline   Reply With Quote
Old 04-16-2016, 03:23 PM   #11
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
I am so discouraged, I wanted them to work great but with my axles so close together I could never use them both. It's just too risky they will get jammed between the tires. Already happened when I tried. One of them we cut on a 45 degree angle so the edge was sharp. It was digging in to my tires so much when it got jammed I am lucky they didn't pop. Not happy at all..........
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 03:35 PM   #12
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
I just measured the distance between my two tires from tread to tread and they are only 2-1/2" apart.
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 03:38 PM   #13
Senior Member
 
Join Date: Dec 2011
Location: Upperco, Md.
Posts: 807
I have a set and love them. One is cut 4 inches and I tapered the edge with a grinder. There is no reason that you couldn't do the same with an addition an inch off. You are right, if they are too long they can and will wedge. Cut an addition inch and feather the edge down. I understand your discouragement but they will work when you get the dimensions right. With your axles being that close together, you need to be careful when pulling off to remove the center one as soon as you have clearance to avoid it tiping and wedging. When you get them right, they are a wonderful tool!!
Ela1948 is offline   Reply With Quote
Old 04-16-2016, 03:50 PM   #14
Senior Member
 
Join Date: Dec 2011
Location: Upperco, Md.
Posts: 807
When you get the dimensions right, you will find that if you only need to raise an inch or so. Use the rear leveler only. If the correction needed is more severe then you need to use both. The short leveler will work fine at that point. Don't give up on them!!
Ela1948 is offline   Reply With Quote
Old 04-16-2016, 06:37 PM   #15
Senior Member
 
ALJO's Avatar
 
Join Date: Oct 2014
Location: Sparwood, BC
Posts: 2,800
Send a message via Skype™ to ALJO
Lukenick1; I use for 50 years just simple 1- 2x6 x 5 ft. and if more is needed 1- 2x4 x 4 ft. They store easy. I just 45 degree angle the ends so the tire runs smooth on it. Mostly you only have to level one side of the Jay Feather.
I tried at one time the plastic (crap) when you drive over it its gone.
In a milk crate I put 6 - 4x4x10" with one 45 for the chocks and 4- 2x6x10" for pads for stabilizer jacks. Go to a building site and they will give the wood to you for free.
They might even cut them to size and 45 them for you.

The Jay Feathers have the (Torflex) axles close together. Have fun!
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
ALJO is offline   Reply With Quote
Old 04-16-2016, 06:44 PM   #16
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
Quote:
Originally Posted by ALJO View Post
Lukenick1; I use for 50 years just simple 1- 2x6 x 5 ft. and if more is needed 1- 2x4 x 4 ft. They store easy. I just 45 degree angle the ends so the tire runs smooth on it. Mostly you only have to level one side of the Jay Feather.
I tried at one time the plastic (crap) when you drive over it its gone.
In a milk crate I put 6 - 4x4x10" with one 45 for the chocks and 4- 2x6x10" for pads for stabilizer jacks. Go to a building site and they will give the wood to you for free.
They might even cut them to size and 45 them for you.

The Jay Feathers have the (Torflex) axles close together. Have fun!
Thanks I think this is going to have to be my route. Now if only I could figure out just how many wood planks I need to stack up. ha ha ha. Especially for storing in my yard which is a slope. I have a level on the front and side of my TT. It has zero in the middle is each number away from the zero 1" of height I need to gain? You guys must all think I am an idiot.
lukenick1 is offline   Reply With Quote
Old 04-16-2016, 07:09 PM   #17
Member
 
Join Date: Mar 2016
Location: Milford
Posts: 31
I carry two 2X10X4' (beveled) and a 3/4" piece of plywood 10"X4' never have needed anything more. Mix and match for what you need to level. After a few trips you will have a good idea what boards to use to get level. Quick easy and no worries about damaging tires.
Overloaded is offline   Reply With Quote
Old 04-17-2016, 01:40 PM   #18
Site Team
 
JFlightRisk's Avatar
 
Join Date: Apr 2012
Location: Newark, NY
Posts: 16,030
Smile

(snip) " You guys must all think I am an idiot." [/QUOTE]

No such thing. Another way to figure out how many boards you need at home, mark about where the tires will be when parked there, and use a 2X4 or pipe, or something pretty straight that's about the length between the wheels. Put the high side on the ground, and put a 4' level on the 2X4. When the board is level, measure to the ground on the low side, and you'll have a good idea how much to put under the wheels. That should get you really close without the trial and error method. Just an idea that popped into my head.
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.

2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
JFlightRisk is offline   Reply With Quote
Old 04-17-2016, 02:01 PM   #19
Senior Member
 
oldmanAZ's Avatar
 
Join Date: Dec 2014
Location: FL
Posts: 11,281
Quote:
Originally Posted by JFlightRisk View Post
(snip) " You guys must all think I am an idiot."
No such thing. Another way to figure out how many boards you need at home, mark about where the tires will be when parked there, and use a 2X4 or pipe, or something pretty straight that's about the length between the wheels. Put the high side on the ground, and put a 4' level on the 2X4. When the board is level, measure to the ground on the low side, and you'll have a good idea how much to put under the wheels. That should get you really close without the trial and error method. Just an idea that popped into my head.[/QUOTE]

A variation on JFlightRisk's post:
I had a 2x4 that was a bit short and an RV bubble level. I leveled the 2x4 with one end on the ground on the 'high side' to a brick under the other end of it. Then moved the 2x4 so it was supported by the brick and leveled it. The distance from the 2x4 to the ground on the 'low side' got me close.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
oldmanAZ is offline   Reply With Quote
Old 04-17-2016, 06:56 PM   #20
Senior Member
 
Join Date: Jul 2015
Location: Springfield
Posts: 341
Made it to the campground safe snd sound and no need to level. Site is perfect!
lukenick1 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.