directv receiver Jay Flight 28RLS

[elkivory]

Our 2018 Jay Flight 28rls tv cabinet is very shallow. I plan to stand genie receiver vertically behind tv. Anybody have this set up and have other ideas on where to put receiver. Thanks

[jbrnigan]

I have that set up. I have "footman" loops on either side of the box and use a double sided velcro stap to secure it to the back wall.

[Vaquero]

I haven't gotten that far, but my plan is.
Shove the cable from the dish in by the power cord.
Up and through the sliding panel on the cord storage cabinet.
Reverse procedure for output. Attach output to factory "cable connection ".
Receiver can set on cabinet by picture window.

[elkivory]

Originally Posted by jbrnigan

I have that set up. I have "footman" loops on either side of the box and use a double sided velcro stap to secure it to the back wall.

Thanks for the info. When you say the back wall, are you talking about in the cabinet behind the tv?

[elkivory]

Originally Posted by Vaquero

I haven't gotten that far, but my plan is.
Shove the cable from the dish in by the power cord.
Up and through the sliding panel on the cord storage cabinet.
Reverse procedure for output. Attach output to factory "cable connection ".
Receiver can set on cabinet by picture window.

My trailer has electrical connector that is mounted on the back. The cord is detatched from the trailer. I have a satellite rg6 connector on the outside that is wired to the tv cabinet.

[jbrnigan]

Originally Posted by elkivory

Thanks for the info. When you say the back wall, are you talking about in the cabinet behind the tv?

Yes, on the cabinet wall behind the TV
(I have RG-6 into the cable box and HDMI out to the TV, all of it behind the TV)