|
|
08-07-2016, 07:04 PM
|
#1
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Do Jayco Engineers even think???
Had some time today so I went "Exploring" my 28BHBE. Took off all the panels I could find, tightened a bunch of things I found loose and found access to some other areas, in case problems arise. But when I got to the rear storage area I was dumbfounded.
I was looking for a suitable location to mount my Progressive Industries EMS and when I located the junction box it was directly below the feed valve for my water heater. It is so close that you can not even turn the valve making it useless.
I will be eliminating the box with the EMS anyway, but it made me wonder what they were thinking when they designed and or built this camper.
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
08-07-2016, 07:22 PM
|
#2
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,092
|
Yeah and if that springs a leak it sprays right onto that junction box!
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
08-07-2016, 08:04 PM
|
#3
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Quote:
Originally Posted by Crabman
Yeah and if that springs a leak it sprays right onto that junction box!
|
That too!
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
08-07-2016, 08:23 PM
|
#4
|
Senior Member
Join Date: Jun 2016
Location: Canutillo
Posts: 602
|
Que es EMS?
What is an EMS box?
Out here, EMS stands for Emergency Medical Service , the local ambulances...
I dont suppose you are adding a tiny little ambulance to your RV?
Just wondering...
But to answer your question: I suppose that this is what happens when something is made by committee. The Water heater folks didn't talk to the electric committee folks.
It sure would be nice if Jayco actually had people in these forums to answer questions.
__________________
Home: El Paso Texas
Jayco Grayhawk 31FS 2010
|
|
|
08-07-2016, 08:38 PM
|
#5
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Quote:
Originally Posted by TimHolt
What is an EMS box?
Out here, EMS stands for Emergency Medical Service , the local ambulances...
I dont suppose you are adding a tiny little ambulance to your RV?
Just wondering...
But to answer your question: I suppose that this is what happens when something is made by committee. The Water heater folks didn't talk to the electric committee folks.
It sure would be nice if Jayco actually had people in these forums to answer questions.
|
EMS. Is Electrical Management System. It's basically a surge suppressor on steroids. Watches for over / under voltage, dropped ground / neutral etc...
And I agree it would be great to have Jayco reps here...
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
08-07-2016, 09:03 PM
|
#6
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
This is not a new idea. My father (RIP) owned a Buick/Pontiac/Land Rover dealership back in the 60's. I clearly remember on the mechanics time clock machine someone posted a picture/joke about how the engineers had intentionally made performing some maintenance item intentionally difficult.
Bless those old mechanics for their life-long advice to me as a teen.
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
08-07-2016, 09:11 PM
|
#7
|
Senior Member
Join Date: Nov 2014
Location: Florien, LA
Posts: 1,872
|
My 2015 didn't have a j-box back there. Wire ran straight from inlet to power panel. I removed the cable at the power inlet and added a new section going from power inlet to the EMS. That way could put it back original if I sold. I agree, what you have was not well thought out for sure.
__________________
John and Rebecca Dickson
Emma-13 / Little John-10 / Iva-7
2013 Ford F-350 Lariat FX4, CC LB PSD, DRW
2015 Jayco Jay Flight 28BHBE (#8)
|
|
|
08-07-2016, 09:27 PM
|
#8
|
Senior Member
Join Date: Jan 2011
Location: Arizona City
Posts: 10,161
|
that is what you get because the right hand doesn't talk to the left hand.
__________________
2018 Jayco Jayfeather 27 RL, 2002 Ford excursion, v-10, 3:73 gears 4x4 mine. 2020 Buick Encore Hers, Retired Air Force, now Retired.
|
|
|
08-08-2016, 03:23 AM
|
#9
|
Senior Member
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
|
Quote:
Originally Posted by Marcm157
Had some time today so I went "Exploring" my 28BHBE. Took off all the panels I could find, tightened a bunch of things I found loose and found access to some other areas, in case problems arise. But when I got to the rear storage area I was dumbfounded.
I was looking for a suitable location to mount my Progressive Industries EMS and when I located the junction box it was directly below the feed valve for my water heater. It is so close that you can not even turn the valve making it useless.
I will be eliminating the box with the EMS anyway, but it made me wonder what they were thinking when they designed and or built this camper.
|
I have said for many years that a design engineer should not be allowed to release anything for production unless he/she had been in the field working on like products for at least 5 years. This is ANYTHING, not just RV's. Without this in the field experience they have no clue what they are doing.
__________________
Ed
KM4STL
2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
|
|
|
08-08-2016, 05:22 AM
|
#10
|
Senior Member
Join Date: Jun 2012
Location: Sparta, TN
Posts: 1,174
|
Production shortcuts/cost reduction will always trump common sense and safety. That is just the way corporate mentality works.
All manufacturers have this same mind set. They know these things happen. Until the cost of law suits and warranty repairs sufficiently erode the bottom line it will not change.
I do believe the people that design these RV's do not use them. If they did they would be laid out differently.
__________________
Chuck - Sparta, TN
2012 Jay Flight 22FB, 2 x Honda EU2000i
2013 GMC Yukon XL Denali AWD
EDUCATION is what you get when you read the fine print.....
EXPERIENCE is what you get when you don't.
|
|
|
08-08-2016, 06:07 AM
|
#11
|
Senior Member
Join Date: Dec 2015
Location: Pennsylvania
Posts: 1,880
|
Quote:
Originally Posted by Marcm157
Had some time today so I went "Exploring" my 28BHBE. Took off all the panels I could find, tightened a bunch of things I found loose and found access to some other areas, in case problems arise. But when I got to the rear storage area I was dumbfounded.
I was looking for a suitable location to mount my Progressive Industries EMS and when I located the junction box it was directly below the feed valve for my water heater. It is so close that you can not even turn the valve making it useless.
I will be eliminating the box with the EMS anyway, but it made me wonder what they were thinking when they designed and or built this camper.
|
hmmm, I wonder what the response would be if you called Jayco, while you had them on the phone, sent the photo I really would like to know what response they give you for something stupid like that?
__________________
2012 Ford Expedition EL
2016 28BHBE, Elite and Thermal Packages.
Equal-i-zer 4-point Sway Control, Southwire 34930 Surge Guard 30A, Tire Minder TPMS A1A
(2) Yamaha EF2000iS Generators, Micro-Air EasyStart™ 364 (3-ton) Soft Start, Garmin RV 890, GoodYear Endurance ST225/75-15 Load Range E
|
|
|
08-08-2016, 06:24 AM
|
#12
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,851
|
Seems like any worker there would need to be a camper also. The location of that box could be moved a foot or so at the installers discretion if he knew the problems it could cause.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-08-2016, 06:24 AM
|
#13
|
Senior Member
Join Date: Jun 2012
Location: Long Island, NY
Posts: 675
|
Quote:
Originally Posted by RAurand
hmmm, I wonder what the response would be if you called Jayco, while you had them on the phone, sent the photo I really would like to know what response they give you for something stupid like that?
|
I bet they would say they will cover the repair under warranty. Then you will have to call your dealer to make an appointment 4 weeks out. Once you arrive 4 weeks later it will take 3-5 days, at the least, for them to look at it. Then another week for the "repair". Then you can have your trailer back. LOL
__________________
Thanks,
Brian
TV = 2006 F-350 CC DRW 6.0
TT = 2018 Wildwood 31KQBTS
TT = 2007 Jayco Jay Flight 27bh - SOLD
|
|
|
08-08-2016, 06:30 AM
|
#14
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Quote:
Originally Posted by RAurand
hmmm, I wonder what the response would be if you called Jayco, while you had them on the phone, sent the photo I really would like to know what response they give you for something stupid like that?
|
This is my plan. I don't expect much but I do want to hear what they have to say. I'm sure it will be along the lines of bring it in to a dealer and we will move the box. We all know how that will turn out, 6 weeks later I may see my camper again. Its an easy fix, it just boggled my mind that someone would find that an acceptable location for an electric box...
I've turned wrenches my entire life as both a second job and as a hobbyist. I've seen designs in vehicles that were plain stupid and couldn't be fixed. At least this one is easy...
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
08-08-2016, 06:36 AM
|
#15
|
Member
Join Date: Mar 2016
Location: Grand Bend
Posts: 48
|
It's not just Trailers, a friend once had a small Chevy with a V6 where you had to lift the motor to change the rear two spark plugs!
|
|
|
08-08-2016, 06:41 AM
|
#16
|
Senior Member
Join Date: Jun 2012
Location: Long Island, NY
Posts: 675
|
Quote:
Originally Posted by hoss10
It's not just Trailers, a friend once had a small Chevy with a V6 where you had to lift the motor to change the rear two spark plugs!
|
I still have one of those. It is the 3600 series V6. 2000 Malibu. I managed to change the plugs once in 200k without tilting the motor. My hands and arms were really torn up. So I never changed them again.
__________________
Thanks,
Brian
TV = 2006 F-350 CC DRW 6.0
TT = 2018 Wildwood 31KQBTS
TT = 2007 Jayco Jay Flight 27bh - SOLD
|
|
|
08-08-2016, 12:10 PM
|
#17
|
Senior Member
Join Date: Feb 2012
Location: Friendswood
Posts: 917
|
Good choice of tools.
Sent from my iPhone using Tapatalk
|
|
|
08-08-2016, 12:18 PM
|
#18
|
Site Team
Join Date: Nov 2012
Location: Clearwater, FL area
Posts: 5,196
|
Quote:
Originally Posted by tnchuck100
........ trump common sense...........
|
Isn't amazing how politics gets injected into a normal conversation..
Only kidding
Don
|
|
|
08-08-2016, 01:26 PM
|
#19
|
Senior Member
Join Date: Mar 2013
Location: CENTRAL NEW YORK
Posts: 984
|
The Amish Craftsmen needed a day off
__________________
2013 33 RLDS
2004 Chevy Avalanche 2500 8.1
2019 Jeep Cherokee Limited 3.2
2016 CTS 4 2.0T
2001 Oldsmobile Aurora 4.0
2015 Chrysler 200C AWD
|
|
|
08-08-2016, 02:46 PM
|
#20
|
Senior Member
Join Date: Apr 2016
Location: Weatherford
Posts: 505
|
Quote:
Originally Posted by Macrosill
I bet they would say they will cover the repair under warranty. Then you will have to call your dealer to make an appointment 4 weeks out. Once you arrive 4 weeks later it will take 3-5 days, at the least, for them to look at it. Then another week for the "repair". Then you can have your trailer back. LOL
|
.......And then...... spend a week repairing all the things their "techs" destroyed "fixing" your problem. Danger Will Robinson!!!
__________________
Jack and Delores, Weatherford, Texas
2016 White Hawk 28DSBH TT, 2014 Ram 4X4 2500 CTD
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|