Domar stabilizer

[Kylepk]

Our new to us 2015 jay feather X17z came with domar pj-01 stabilizer jacks that were not on the trailer. I’m wondering how to install this type of Jack?

[RogerR]

Best is tack or welded on, but they can be screwed or bolted on. Many youtubes on how to do it. One way is to go to a dealer that has some installed and see how they did it if there is nobody you know that already have them.

[campin]

Is the (old) Dorman PJ-01 stabilizer considered a 20” jack? I’m not able to find specs. Thnx!

[Jagiven]

17Z, unless it has been changed recently only came with two 16"(??) stabilizers on the rear. Nothing up front. If they were damaged, the pervious owner may have removed them and never installed the new ones. Personally I would rather have the 20" version.

Mine are just screwed to the frame, with self tapping screws right in the corners. My HTT is in storage for a few more days. I can take a pictures once it gets home. PM me, later in the week if you need a picture.

[campin]

Thnx Jagiven...I received an answer from Dorman but jaycoowners website and members is my first go to source for info. Thnx again, Cheers