If they are the typical door hinge with hinge pins, pull out the pins one at a time and with the pin laying on a hard surface tap the middle of the pin with a hammer to cause a slight bend and re-insert into hinge. The bent pin will put pressure on the hinge holding the door in place.
If they are the typical door hinge with hinge pins, pull out the pins one at a time and with the pin laying on a hard surface tap the middle of the pin with a hammer to cause a slight bend and re-insert into hinge. The bent pin will put pressure on the hinge holding the door in place.
Big Al
Sadly they’re not typical. The pin looks to be permanent with both ends flanged.