Jayco RV Owners Forum

Thread Tools Display Modes
Old 07-26-2012, 04:12 PM   #11
Junior Member
Join Date: Jun 2012
Location: Texas
Posts: 25
I picked up a 12V blacker and decker cordless from Sam's club for $26, and it works great. Also, bonus is not enough torque to push the trailer up when setting the stabilizers.

2012 Dodge Ram Hemi 3.55

2012 Jayco Jay Flight 26BH

Reese Pro Series WDH w/ sway control 1000#
Mikey72 is offline   Reply With Quote
Old 07-26-2012, 04:31 PM   #12
Senior Member
Join Date: Oct 2011
Location: Tacoma, WA
Posts: 102
If you decide to invest in something pretty nice, check out the Ridgid cordless tools from Home Depot. I got the 18v cordless drill with Lithium Ion batteries. The batteries last a really long time and they hold a charge for at least a month or 2 off of the charger (with all 4 bars of power). The best part is the drill AND batteries have a lifetime warranty! I got a deal at Home Depot where they give you an extra battery free. I plan to eventually buy a cordless recip saw and an impact gun. The cordless drill works awesome for lowering/raising the jacks and even puts a pretty good amount of pressure on it. It works good in high or low, but high is way too fast for me

I'm really glad I got manual jacks with the drill setup. My dealer says he specs manual jacks on all his trailers due to problems they've had with the electric ones. On the flip side, he gets the electric tongue jacks because they've rarely had a failure. Setup is really fast with the cordless drill (as said above, I probably get all four jacks down in the time of one manually).

2012 Jay Flight 29QBH
2003 Dodge Ram 2500 Cummins H.O. 48RE
Equalizer 4-pt sway control hitch
Honda EU1000i
2006 Jayfeather 29Y - past Jayco
KachFam is offline   Reply With Quote
Old 07-26-2012, 05:56 PM   #13
Senior Member
Jagiven's Avatar
Join Date: May 2012
Location: Minnesota
Posts: 4,112
Personally I would look for a cordless drill that uses a “universal battery” for multiple tools. I have an 18V Dewalt drill. What I really like and tend to use more than the drill is the reciprocating saw. I have a pruning blade in it. I use it to cut fire wood. It works great!

Look at a Pawn shop for a used unit, especially if you are not going to use it for anything other than the trailer.
Jagiven is offline   Reply With Quote
Old 07-26-2012, 07:30 PM   #14
Senior Member
Join Date: Dec 2010
Location: North Idaho/Arizona
Posts: 5,303
Cordless impact driver works well and can be used for tires. They are a little noisy.
2011 Eagle 330RLTS with just about every option.
2017 Silverado 1500 4x4 5.3 with tow package.

I was born with nothing and I still have most of it left.
clutch is offline   Reply With Quote
Old 07-26-2012, 07:50 PM   #15
Junior Member
Fil564's Avatar
Join Date: Aug 2011
Location: Pittsburgh,PA
Posts: 25
I got a cheap 18v drill from Harbor Freight that was on sale for about $16 which gets me to the ground and then I use the hand crank to set them. I did not want my DeWalt 18v XRP disappearing so I chose this route. I use a 3/4" socket I picked up at the RV store and it works great. I have heard some people setting up with a cordless impact gun which would do the job also.

2009 Eagle Super Lite 298RLS
2010 Toyota Tundra Double Cab SR5
Fil564 is offline   Reply With Quote
Old 07-27-2012, 11:57 AM   #16
Junior Member
Join Date: Apr 2012
Location: Flower Mound, TX
Posts: 24
I am not the worlds largest Ryobi fan, but I bought one of the Home Depot packs with the drill, bag, flashlight, charger, 2 batteries, and made it a permanent fixture in the cupbard just inside the door of my trailer. I leave the charger and all in there with the cord running out of the door to the outlet above it. You can reach this cabinet from outside easily and always have a battery and flashlight ready also.

I also grabbed one of the drill to 3/8's drive long adapters (6 inch I think) at Northern Tool, and one that locks the socket onto the extension (see pic) along with a cheap 3/4" socket, I welded the socket to the extension so nobody can borrow/steal/loose it for other reasons. I now have my stabilizer kit always in that cabinet, and have a flashlight too. Total investment of about $105 going by memory.

As far as power, I would say this 18V Ryobi on the low gear speed, is MORE than enough power to do what you want. I do NOT run mine up so hard as to stall the drill when in low gear. High gear yes, not low. Maybe a stupid measurement but thats based on the pops n creeks of the trailer when doing the adjustments..I try to minimize that...lol

Name:  TTN-15214.jpg
Views: 87
Size:  4.9 KB
Greg D.
Flower Mound, TX
2001 Jayco 31' Qwest
2011 F-150 Ecoboost
Lots n lots of firearms!
vwprostock is offline   Reply With Quote
Old 07-27-2012, 01:09 PM   #17
Senior Member
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 3,008
I've got a 18v vari-speed Craftsman that has an adjustable clutch. Does the job nicely. I keep it in the house so the drill is on the packing list (the crank stays in the TT as insurance against my faulty packing)

2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
RedHorse1 is offline   Reply With Quote
Old 07-27-2012, 04:33 PM   #18
Join Date: Sep 2011
Location: Lancaster, CA
Posts: 37
Send a message via MSN to 2008jeep
As stated by others, I got a Harbor Freight battery operated drill. Its an 18 Volt drill but its only good for once up, once down and once up before the power is too low to use again. I put the charger in the trailer and hooked to an out of the way outlet. Note: After the initial charge on the HF drills don't charge them much longer than 3 or 4 hours as the charger and battery get so hot I suspect they might be a fire hazard. They are easy to forget, but don't
2008jeep is offline   Reply With Quote
Old 07-27-2012, 04:56 PM   #19
Senior Member
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 3,008
Originally Posted by 2008jeep View Post
Its an 18 Volt drill but its only good for once
I'm taking your comment out of context but I consider any tool I buy at HF to be a single use tool.:hihi:
My Craftsman charger has a trickle-charge feature so I can leave it in for days with no problem. Once charged it's good for several cycles of the stab arms, plus I've got a nice cordless drill on hand should I need. I don't bother to take the charger with me on TT outings. I think I spent $50 - $70 in it and if it breaks I'll probably get another.
I do buy quite a bit of stuff from HF but nothing I expect to be dependable or high quality. The disappointment in the Craft- drill is that it didn't come with a storage box.
Oh well, complain in one hand and .......

2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
RedHorse1 is offline   Reply With Quote
Old 07-27-2012, 07:13 PM   #20
Join Date: Jul 2011
Location: Fairborn, Ohio
Posts: 40
I cranked down the jacks on our 26RLS by hand once, and that is all it took to buy the bit to fit my cordless drill. Now the jacks are up and down in less than 5 minutes.

Jebster is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 12:19 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.