eagle 2020 eagle rsts-12v wiring for winegard gateway

[djensen9367]

Trying to install the winegard gateway on my 2020 eagle. Pulled the cap in the bedroom for the gateway wiring/they have the antenna wires but no power wires bundles. There is a wire (white/white with blue stripe) that looks like it feeds the lights. If this is 12v I should be able to use it (just leave the lights on when using the gateway).

Has anyone done this install or does anyone know if the wire I found is 12v? Or does anyone have the 12v wiring diagram for this or an earlier Eagle? Helep please

[donallies]

the white/ white with blue stripe is the 12v, the end should be taped to the coax with wire nuts on it.

[djensen9367]

It was not dropped down but i spliced into it and all is working, that was the only snafu I found on the whole trailer-eveything is working great and I have nothing for the dealer to correct-that speaks very well of Jayco quality, there is usually something that doesn't work quite right or needs adjusting etc-I have not found anything, all I need now is a place to go, the virus sure made a mess of things.

[Angelo Cecere]

I have eagle ht 29.5 and there was a white a green wire shoved in hole with orange connectors on end. Does anyone know if thats my power wire? If so, do i need the switch?

[donallies]

those are constant hot (12v) no switch required.

[Lizzie1275]

We have the same problem. The power wire isn’t there. I see a blue and white wire but I can’t pull it down. Is that the 12v power? If so, we don’t need the switch that the manual talks about?

[donallies]

No you don't need the switch, if you pull the coax down you'll find the wires taped to it and wire nuted.