Eagle inverter AC in source

[morleyz]

I have an Eagle 330RSTS. I have the Xantrex Freedom 1200 inverter and it has switched to running off battery even when plugged into shore power. I disconnected all power to reboot, but still only running on battery.

Unfortunately, I don't have a multimeter until tomorrow when I can test the AC in line to see if there is 120V present when on shore power. Just in case there is not 120V in, does anyone know where this power comes from? Is it fused or on a circuit breaker somewhere? Checked AC circuits in the converter and none seem to be labeled as going to the inverter (and none were tripped anyway).

Thanks.

[Grumpy]

There is a circuit breaker in your regular breaker panel. Don't just look, turn them off and on to reset. Also check the connections on the front of the INVERTER. They are push in and not always in tight, others have found them disconnected.

[morleyz]

Originally Posted by Grumpy

They are push in and not always in tight, others have found them disconnected.

Nailed it. Thanks. Terrible design IMO.