|
12-04-2019, 09:26 AM
|
#1
|
Junior Member
Join Date: Dec 2019
Location: newtown
Posts: 4
|
Fiberglass or aluminum
We are picking out options for a Jayco bungalow. This will be a seasonal trailer in Maine. We plan on attaching a screen room to it which will require quite a few holes in the trailer. The dealer recommends aluminum over fiberglass. Which is better long term ?
|
|
|
12-04-2019, 10:17 AM
|
#2
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,771
|
Welcome to JOF.
Are you talking roof or siding?
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
12-04-2019, 10:24 AM
|
#3
|
Junior Member
Join Date: Dec 2019
Location: newtown
Posts: 4
|
It’s the sides.
|
|
|
12-04-2019, 11:06 AM
|
#4
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,206
|
I think there was a poll with quite a lively discussion about this around here somewhere.
Anyway, I prefer aluminum generally. IMO, it's a little easier to keep up with, easier to repair, lasts a LONG time without getting dull or faded if treated right (just a wash with wax in it), no delamination.
One downside is it dents VERY easily, and a lot of people think it makes the unit look "cheap".
It MAY be easier to attach things (like a screen room) to a fiberglass sided rig.
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
12-04-2019, 11:22 AM
|
#5
|
Junior Member
Join Date: Dec 2019
Location: newtown
Posts: 4
|
Thanks for your responses.
|
|
|
12-04-2019, 11:44 AM
|
#6
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,091
|
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
12-04-2019, 02:15 PM
|
#7
|
Junior Member
Join Date: Dec 2019
Location: newtown
Posts: 4
|
Thanks for sending me the discussion, Crabman !
|
|
|
12-04-2019, 06:01 PM
|
#8
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
maine summers,
Welcome to JOF
I personally would go with aluminum sides based on your type of usage.
It may be helpful to have the bungalow's frame drawings for that screen room attachment. I would ask your dealer to provide them, or you can request them directly from Jayco once you have possession and a VIN number. Jayco may hold back on your request until out of warranty, thus the dealership avenue.
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
12-04-2019, 06:05 PM
|
#9
|
Site Team
Join Date: Apr 2012
Location: Newark, NY
Posts: 15,761
|
Welcome to the Forum from Western New York State!
__________________
Moderator
Think you're too old to cry or swear out loud...walk into your hitch in the dark.
2012 Jay Flight 19RD
2016 Ford F150 XLT 2X4 SC 3.5L Eco Max Tow
2010 Tundra TRD DBL Cab (Traded)
2 new fluffy Corgis, Bayley and Stanley
|
|
|
12-04-2019, 06:05 PM
|
#10
|
Senior Member
Join Date: Dec 2017
Location: RV
Posts: 892
|
Aluminum
__________________
Full Time RVing
|
|
|
12-04-2019, 06:27 PM
|
#11
|
Site Team
Join Date: May 2017
Location: Connellsville
Posts: 22,680
|
Though I currently have a fiberglass side trailer, I far prefer traditional aluminum siding over the long term.
__________________
Moderator
2017 Jay Feather 7 22BHM Baja/Andersen WD
2018 F150 4x4 3.5L Ecoboost Max Tow
2015 MB Sprinter 2500 Passenger 2.1L Diesel
2007 Ram 2500 4x4 Cummins 5.9L G56
|
|
|
12-04-2019, 09:03 PM
|
#12
|
Senior Member
Join Date: Dec 2015
Location: Pennsylvania
Posts: 1,880
|
Aluminum don't seem to have the cracking problem fiberglass is having.
__________________
2012 Ford Expedition EL
2016 28BHBE, Elite and Thermal Packages.
Equal-i-zer 4-point Sway Control, Southwire 34930 Surge Guard 30A, Tire Minder TPMS A1A
(2) Yamaha EF2000iS Generators, Micro-Air EasyStart™ 364 (3-ton) Soft Start, Garmin RV 890, GoodYear Endurance ST225/75-15 Load Range E
|
|
|
12-04-2019, 11:02 PM
|
#13
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,737
|
In this case, I would go fiberglass. Added a semi permanent screen room, would allow you to easily seal up the wall to keep the bugs out.
As for drilling, I would try to design the addition to minimize the holes. I would also make sure to use the correct sealants at each hole, as water behind fiberglass siding will cause delamination issues.
|
|
|
12-05-2019, 12:37 AM
|
#14
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
I would go aluminum. Especially for a seasonal trailer.. no delamination worries.
__________________
2016 Jay Flight 38FDDS
|
|
|
12-14-2019, 03:23 PM
|
#15
|
Junior Member
Join Date: Aug 2018
Location: Clinton
Posts: 29
|
Aluminum
Aluminum is my preferred choice as I purchased fiberglass two years ago and have regretted it both because it is in the shop now getting two cracks fixed and also my wallet would be heavier had we went aluminum.
|
|
|
12-14-2019, 06:58 PM
|
#16
|
Senior Member
Join Date: Sep 2014
Location: San Marcos
Posts: 228
|
I wouldn’t even think about putting holes is a trailer. It will leak eventually. As far as construction goes, just be sure you don’t buy a fiberglass over wood frame unit. This type of construction offers NO protection from lightning. Buy either fiberglass over aluminum frame, or aluminum over wood (or aluminum).
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|