Fuse/Breaker Panel

[Rubber Man]

Today I decided to do some lighting upgrades, so I pulled all of the 15 amp fuses, but the lights still have power. I know I can disconnect the battery, but shouldn't fuses do the same thing?

[Cavie]

Originally Posted by Rubber Man

Today I decided to do some lighting upgrades, so I pulled all of the 15 amp fuses, but the lights still have power. I know I can disconnect the battery, but shouldn't fuses do the same thing?

try the 20's.

[Rubber Man]

Pic of the fuse panel. The 15 amp fuses are marked for lights.

[rccs]

Looks like that should have done it with all the ones you have out. Something must not be wired the way it should have been I would guess.

Did you try pulling the 30 amp one also? The 30 and 40 should be the ones from the battery and converter I would think.

[Rubber Man]

Thanks, I haven't tried that yet, but I did notice the lights are very dim with the fuses out.
I'm probably not even going to worry about disconnecting the power when I install the new lights. it's just weird.

[Rubber Man]

Installed battery disconnect today. Super easy. Now I can work on my celling lights.