|
08-13-2018, 01:59 PM
|
#1
|
Senior Member
Join Date: Aug 2015
Location: Oregon
Posts: 265
|
How do I fix this?
Corner peeling away.
__________________
2012 RAM 2500 Megacab Laramie Diesel
2016 Jayco Eagle 284BHBE
ProPride 3P WDH
|
|
|
08-13-2018, 02:09 PM
|
#2
|
Junior Member
Join Date: Aug 2018
Location: Bonney lake
Posts: 1
|
I have jayco swift slx 2013 18.5 ft water heater pilot is lit but won't heat up the water . Comes on for 3 minutes and shuts off no hot water. What's the issue here
|
|
|
08-13-2018, 02:10 PM
|
#3
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
How do I fix this?
Are you referring to the top corner? Looks like the vinyl insert that covers the screws has shrunk. You can buy replacement insert and change it out with a new one in under 5 minutes
https://www.etrailer.com/RV-Exterior.../CAM25173.html
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
08-13-2018, 02:16 PM
|
#4
|
Senior Member
Join Date: Aug 2015
Location: Oregon
Posts: 265
|
Quote:
Originally Posted by Magnolia Tom
|
Cool. Thanks!
__________________
2012 RAM 2500 Megacab Laramie Diesel
2016 Jayco Eagle 284BHBE
ProPride 3P WDH
|
|
|
08-13-2018, 03:06 PM
|
#5
|
Senior Member
Join Date: May 2013
Location: SE Wisconsin
Posts: 3,430
|
Quote:
Originally Posted by Hayjayman
I have jayco swift slx 2013 18.5 ft water heater pilot is lit but won't heat up the water . Comes on for 3 minutes and shuts off no hot water. What's the issue here
|
I don't have an answer for you but you'd be better off starting your own thread. This is going to get lost in the middle of someone else's issue.
And welcome!
__________________
Chuck
2013 Jayco Jayfeather X20 E (sold)
2016 Chevy Silverado LTZ 2 Z71 Crew Cab (sold, and dearly missed)
|
|
|
08-13-2018, 04:05 PM
|
#6
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Quote:
Originally Posted by Hayjayman
I have jayco swift slx 2013 18.5 ft water heater pilot is lit but won't heat up the water . Comes on for 3 minutes and shuts off no hot water. What's the issue here
|
What DocBrown said and welcome.
There are several issues like this. Please try the 'search' function if you decide not start a new topic.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
08-13-2018, 05:58 PM
|
#7
|
Senior Member
Join Date: Mar 2018
Location: Chicago
Posts: 242
|
When my White Hawk did this I just used some brown Quad sealant from Home Depot. Stuck really well to everything and look brand new when I sold the rig after two years.
|
|
|
08-13-2018, 06:05 PM
|
#8
|
Senior Member
Join Date: Jun 2012
Location: West Chicago
Posts: 550
|
Avoid stepping on that when accessing roof, good luck with solution.
__________________
2019 F250, gas, 4.30
2017 29RKS
|
|
|
09-05-2018, 10:54 AM
|
#9
|
Senior Member
Join Date: Aug 2015
Location: Oregon
Posts: 265
|
Quote:
Originally Posted by Magnolia Tom
|
Is 3/4" the right size? Everyplace else seems to sell this stuff in 1 inch width?
I was trying to find it locally, but all I can find is 1".
Also, I measured the gap, and it seems like 3/4" might be just barely large enough?
__________________
2012 RAM 2500 Megacab Laramie Diesel
2016 Jayco Eagle 284BHBE
ProPride 3P WDH
|
|
|
09-05-2018, 11:10 AM
|
#10
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by ecksdude
Is 3/4" the right size? Everyplace else seems to sell this stuff in 1 inch width?
I was trying to find it locally, but all I can find is 1".
Also, I measured the gap, and it seems like 3/4" might be just barely large enough?
|
I don’t know what size is on your rig but you could take a piece off to measure. If the gap in the channel is 3/4” then I would guess the 1” strip would be the way to go. That way you get the bulge from the vinyl to help shed away the water
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|