Interior window frame

[mikeauto2]

Our 32bhds came in this week and are taking delivery this week. All is good but one thing I noticed was in the interior metal window frame seems to have gaps between window and where the frame screws in to wall. Only gaps are on corners where's it is turning. Sorry for the bad description should have took a pic. Curios if anybody had a pic of there's or has seen this . is it consistint or bad install?
Thanks mike

[BudMor]

It's most likely just the way the aluminum extrusion ends up after its bent in the corner radius. Mine all have gaps at the corners.

[Tinyhse]

My 145RB has the corner gap also. If I use a flashlight I can see the wood framing at the corner bend. It was not an issue for me. You do need to watch the exterior seals. They only use a foam gasket without any bead of protection.
My plan is to eventually run Pro-Flex RV along the tops and sides of all windows, seams and lights and anywhere else water can enter.

[mikeauto2]

Ok thank you. Makes me feel a little better. Gaps were bigger than I thought would be. I can also we the wood framing.