Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-29-2014, 09:29 AM   #1
Member
 
Tom_OC's Avatar
 
Join Date: Nov 2014
Location: Visalia
Posts: 43
Light Switches

Recently bought a new 2014 JayFlight 24FBS. In the panel box inside where all your switches are, there are 4 light switches. We have figured out what the first 3 are for, which is the first one is an interior light, 2nd is LED awning light the 3rd being interior kitchen light, and we cannot figure out the 4th switch. Does anybody know what this is for or where I can find what this is for. I have been all through the owners manual and it doesn't have anything listed for the switches. Any help would be appreciated. Thanks
Tom_OC is offline   Reply With Quote
Old 11-29-2014, 12:38 PM   #2
Member
 
Join Date: May 2013
Location: Washington
Posts: 93
Could it be your scare light?
__________________
Crablad
Washington
2013 31.5 RLTS Eagle
Crablad is offline   Reply With Quote
Old 11-29-2014, 08:07 PM   #3
Tim
Junior Member
 
Tim's Avatar
 
Join Date: May 2014
Location: Devon
Posts: 28
On our 28BHBE the fourth switch turns on the light at the back of the trailer where the sewage dump is. Yours might be for something similar.

Tim
__________________
----------------------------
2014 Jayco Jay Flight 28BHBE
2015 GMC Sierra 2500 HD Double Cab
Tim is offline   Reply With Quote
Old 11-29-2014, 09:12 PM   #4
Senior Member
 
ninjahbob's Avatar
 
Join Date: May 2014
Location: Eatonton
Posts: 305
Like Tim that is what our 4 switch works.
ninjahbob is offline   Reply With Quote
Old 11-29-2014, 09:22 PM   #5
Member
 
Tom_OC's Avatar
 
Join Date: Nov 2014
Location: Visalia
Posts: 43
Thank you very much for your input. It is an exterior light above the waste dump. I wish the Jayco owners manual was much better than it is. Being a first time TT owner, I need things a bit more detailed than what is offered. Almost a how to guide. Thanks again for your help
Tom
Tom_OC is offline   Reply With Quote
Old 11-30-2014, 06:00 AM   #6
Site Team
 
norty1's Avatar
 
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,772
I like a brand specific forum like this because someone here will have already answered your question and will gladly save you the headache.
Thanks to all here who prove that over and over.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
norty1 is offline   Reply With Quote
Old 12-01-2014, 04:23 PM   #7
Senior Member
 
Camper_bob's Avatar
 
Join Date: Sep 2013
Location: South Texas
Posts: 7,207
I labeled mine with DW's label maker. Helps a lot and keeps me from flipping switches to find the right one!
__________________

-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
Camper_bob is offline   Reply With Quote
Old 12-01-2014, 07:54 PM   #8
Senior Member
 
Join Date: Sep 2014
Location: Valparaiso
Posts: 188
Had a similar issue when our White Hawk was new. It had three switches and we couldn't figure out what one was for. We also had an outside light that we couldn't figure out how to turn on. Actually we figured it out but waited for a warranty visit to the dealer. Come to find out, the light wasn't hooked to the switch correctly.
__________________
Dan & Christine (and Molly)
2022 Ram 2500 4WD Crew Cab Short Bed
2023 Jayco Eagle HT 30.5CKTS Fifth Wheel
redenbacher is offline   Reply With Quote
Old 12-01-2014, 08:19 PM   #9
Lost in the Woods
 
Join Date: Jan 2014
Location: N/A
Posts: 567
Quote:
Originally Posted by Camper_bob View Post
I labeled mine with DW's label maker. Helps a lot and keeps me from flipping switches to find the right one!
X2 on the label maker. Several switches were not labeled including the control box, bathroom, bedroom. I also turned several switches 180 degrees so that up is on for all. Also my electric stabilizer jack switches were upside down as well so I flipped them. This kind of crap drives me crazy. Does Jayco have a QC dept.?
wwsmith111 is offline   Reply With Quote
Old 12-02-2014, 06:37 AM   #10
Senior Member
 
ninjahbob's Avatar
 
Join Date: May 2014
Location: Eatonton
Posts: 305
WWSMITH111 is correct Jayco Quality Control is out of Control. They need to start having a line foreman, team leader, supervisor or someone sign off on inspection and we would not have to put up with this annoying crap. Hold some ones feet to the fire. It might help if Jayco assigned someone to monitor this blog so they could be aware of the issues. Happy camping and Merry Christmas.
ninjahbob is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 10:42 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.