Lubricants

[Bigdomino]

Have a 2017 whitehawk 27Dsrl. It has one large slide out. This slide out has the metal bars under it. I also have the electric trailer stabilizers. So, what are you all doing about lugrication? Do you put anything on the slide? What about the electric stabilizers? Also, what are you using on your hitch and distribution hitch bars?

Thanks.

Steve

[jimp]

I'm using Liquid Wrench lube spray, white lithium grease on just about everything that moves or should move. I use regular bearing grease on the coupler & ball, and lithium grease on the sway bar hitch head sockets. Pretty quiet 95% of the time.

[Jagiven]

I have never lubed my slideout.

I only lube my stabilizers with a dry lube, my preference is Triflow, it is Teflon based, downside, it is expensive.

Awning arms, silicone or Triflow

Hitch, for the ball, I use bearing grease. I cover the ball with a solo cup between trips. The pivot points, I use 600 wt rear axle lube. The hitch is quiet as a church mouse.

Once every few years I lube the tongue jack with 600 wt axle lube.

Can't think of anything else I lube.

[bdreinv]

On the Schwin Tecs a dry lube with Teflon for the motors, nothing else!