need ideas about replacing pantry shelving

[wpgladybug]

this is my first post and have a question...has anyone replaced their pantry shelving....I have a 2011 Jayco 25 RKS and the pantry is just inside the door beside the stove......it only has a 9 inch wide door and it is rather deep and when I am looking for things in the back it is nearly impossible to find it....I would like to have pull out wire baskets but on looking at the cupboard the door is not as wide as the inside... has anyone purchase something that would fit into this space or have you had to build something.....thanks everyone....safe travels

[Rustic Eagle]

Welcome to JOF

Along with the replies to your inquiry, check out the JOF "Jayco Mods" forum you may run across some ideas there as well.

Bob

[Camper_bob]

I'm having the exact same dilemma with my 28 BHBE. The pantry is very deep and narrow, so getting to things in the back is a PITA.

My current plan is to fabricate some shallow drawers that are as deep as the cabinet, install some 1x1 or 1x2 in between the existing cabinet structure and use deep ball bearing drawer glides to attach them. I'll lose a little storage space, but hopefully not too much...

My trailer is in storage right now, so I'm still trying to figure out exactly how it'll work. I'm a little worried that the drawers won't clear the door coming out, but I think my doors swing wide enough to accommodate them. I won't get to work on this project for a while, but I'll post up pics of this and another mod I'm working on for the wardrobes whenever I can (probably close to Thanksgiving... ).

I think we would have trouble finding something like wire rack/drawers in this size. So rather than settle with something that might work, I'm just going to make something I like.

[Camper_bob]

Something like this:

http://www.jaycoowners.com/forums/sh...hlight=drawers

But instead of buying the drawers and assembling them, I'm planning to fabricate them myself.

[Camper_bob]

Or like these:

http://www.jaycoowners.com/forums/sh...hlight=drawers

Again, I'll put my own twist on them, but this is the basic idea.

[smoothy]

Hardware available here
http://www.rockler.com/

[wpgladybug]

Originally Posted by Camper_bob

Or like these:

http://www.jaycoowners.com/forums/sh...hlight=drawers

Again, I'll put my own twist on them, but this is the basic idea.

Thanx Camper Bob.......I was thinking of something like that.....but was hoping for something easier.....wish Jayco would have some mod in a box I could buy..... hope they are listening....as from some of the posts I read there is a need........