|
04-08-2011, 04:40 PM
|
#1
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Oh man..I am living right! Gutter Damage
We had a huge storm blow through here on Monday.....well family finally got out to our property where I store the trailer and I got "the call"...you better come look at this...the roof is about to slide down on your camper....
Well we have a 30 year old barn that has withstood many storms, but the roof is no more....It pealed it back right next to the TT and some how it managed to only minor damage to the gutter. I guess I am living right....who knows....
See the pic below of the gutter...I am thinking about just using a board and a hammer and slowly working it back into shape. Any other suggestions?
|
|
|
04-08-2011, 05:35 PM
|
#2
|
Senior Member
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
|
Wow! Dodged that bullet. Murphy must not be following you around right now.
__________________
Ed
KM4STL
2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
|
|
|
04-08-2011, 06:33 PM
|
#3
|
Senior Member
Join Date: Oct 2009
Location: Wedowee AL
Posts: 272
|
The board and hammer sound like a plan to me. Agree that you dodged that bullet.
__________________
F250 HD 7.3 Diesel :)
31 Ft RLS Designer 5th Wheel :D
|
|
|
04-08-2011, 06:42 PM
|
#4
|
Senior Member
Join Date: Jan 2010
Location: Wisconsin
Posts: 7,401
|
Sorry to hear/see about your gutter, but it could have been alot worse. The board and hammer should do the trick. Good luck with the repair.
|
|
|
04-08-2011, 07:17 PM
|
#5
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,093
|
Yeah buddy you came out of that pretty well all things considered. Your board and hammer method should do the trick.The barn on the other hand will take a little more sweat equity to get it back in shape! We also had bad storms and winds blow through, no fun out on the water! Good luck.
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
04-08-2011, 07:52 PM
|
#6
|
Senior Member
Join Date: Oct 2010
Location: West Texas
Posts: 2,114
|
Yep, the Jayflight will be OK but your barn is toast.
__________________
Dan
2016 Chevy LTZ - Duramax/Allison
2008 Eagle 30.5BHS
|
|
|
04-08-2011, 09:31 PM
|
#7
|
Senior Member
Join Date: Oct 2010
Posts: 414
|
Board and hammer. Also put solid tube / rod inside the gutter before hammering on the outer board. Thus, getting a round shape inside the gutter. Do "little hits" at a time - until the appropriate force is found. re: Hitting too hard isn't always needed.
Good luck. Actually, your TT already had good luck. A few more inches closer to the barn and its roof surface would have gotten top skinned. OUCH!!!!
.
|
|
|
04-08-2011, 10:41 PM
|
#8
|
Senior Member
Join Date: Dec 2010
Location: North Idaho/Arizona
Posts: 5,446
|
You are lucky. Just do a little at a time, you don't want to smack the roof membrane now.
__________________
2011 Eagle 330RLTS with just about every option.
2017 Silverado 1500 4x4 5.3 with tow package. (no, we don't tow the Jayco with it.)
2018 Surveyor 265RLDS well equipped.
Life in the slow lane is still life.
|
|
|
04-09-2011, 07:22 AM
|
#9
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Quote:
Originally Posted by Spike99
Also put solid tube / rod inside the gutter before hammering on the outer board. Thus, getting a round shape inside the gutter.
|
Now that is an excellent idea! I will have to look around the barn, I think I have some all thread around somewhere that might work.
I am still looking at this thing with amazement....
On the right side of the barn is about a 14x20 piece folded over to the left side where about a 14x16 piece flew up. They are all mashed together in a stack and all it hit was the gutter on the TT - which is like 1/2" wide. If it had moved even 1/4" more toward the camper it probably would have taken a chunk out of it.
I think what saved me was my jack leg electrical wiring in the barn...It stopped pulling out rafters where I ran my romex....ripped about 3 staples out and part of the rafter, but it held....if it had not, most of the debris would have landed on the TT....
That was some wicked storm..... Right after the storm we made a pretty good house fire, two houses with trees through them, and a bunch of injuries. Our county had over 50,000 homes without power....so all in all....I am still feeling lucky......
|
|
|
04-09-2011, 07:45 AM
|
#10
|
Senior Member
Join Date: Oct 2010
Location: Full Timing since December 2011
Posts: 311
|
Wow... Lucky is right. I too like the board and rod idea. Continue on with your good luck!
__________________
2015 Seismic 4212 on order
2010.5 Dodge Ram 3500 MC CTD HD Dually (4.10 gears), Firestone Air-Bags, with a Superglide model 4400.
2012 Yamaha Zuma 125
|
|
|
04-09-2011, 08:07 AM
|
#11
|
Senior Member
Join Date: Oct 2010
Location: Merrimack NH
Posts: 917
|
Great idea for the gutter, now try a can of gas & a match for the barn !!!!!!!!!!!!!
__________________
Larry & Rachel Demers 2013 F150 Eco Boost Super Cab 6.5 bed 6 sp. 3.31 4x4 White Hawk 28DSBH
|
|
|
04-09-2011, 08:29 AM
|
#12
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Dont make too much fun of my old barn! It has been there since the early 80s and is a nice place to keep my RV accessories! I cant get myself to tear it down....I think I can repair it pretty cheap....
Cant see all of it, but this is the "new" barn (about 12 years old)....it is 48x36....
|
|
|
04-09-2011, 11:16 AM
|
#13
|
Senior Member
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,002
|
OMG , WOW , And VERY LUCKY!
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
|
|
|
04-13-2011, 12:10 PM
|
#14
|
Member
Join Date: Feb 2011
Location: Plymouth, MA
Posts: 44
|
Yup, i was thinking wooden dowel from the Depot inside he gutter then a 2x4 on it's side and a hammer with alot of small taps. Then slide the dowel down and out.
|
|
|
04-13-2011, 01:03 PM
|
#15
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,093
|
That new barn has "Store your Jayco here" written all over it. Or are the doors not high enough to clear the top of the A/C?
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
04-13-2011, 01:19 PM
|
#16
|
Senior Member
Join Date: Feb 2011
Location: Germantown, TN
Posts: 4,923
|
Well I have a couple of problems (yeah I know...but I am talking about related to this)...
It is hard to tell from the pic, but I am not sure there is really not enough room to maneuver it into there since the drive is so narrow in front. It is also a working barn with tractor stuff, 4 wheelers, etc on the door side and a shop on the other. Wish I could sacrifice the space, but it wont work.
I am thinking about building a large implement shed one day and making enough room to get the camper under it....it just takes money and time....
BTW - that is a Miracle Truss Building...same company that I have been seeing on Mark's RV Garage. I really like it.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|