Prewired for Solar to where?

[Melinhead]

my 2021 264BHW came prewired for solar, but wired to where? For the life of me I can't figure out where those wires would be ran to inside the trailer. I have read other posts that indicate that there is a sticker on the wall that says it is prewired for solar and the wires are behind that sticker. My trailer has no such sticker and no indication anywhere in the trailer where those wires might be. Any ideas?

[Spower]

Those wires run to your battery(ies) and to the controller. If you don't have a controller there should be info somewhere (email jayco service and ask) as to where the controller wires are located. Usually you would make a hole where they are and connect a controller in that location.
Also, those connectors in your pictures are for the solar panel, it just plugs in, connect a controller and you are good to go for solar!
Hope this helps!

[mtdawg]

I would start with the dealer who sold you the unit. They owe you an answer as to where the wires terminate inside the trailer. There should have been a decal, and if not they should have told you where the solar controller would be mounted.

Jim

[dalfaro]

Every trailer they run them differently. In my 212qbw they were ran in to the bedroom area. We did have a sticker though. You just hook panel to roof connect wires in wall to controller of your choice then wires from controller to battery. Call jayco they will tell you where the wire ends are.

[newsleet]

My 2017 338rets had them in the hall behind the slide up panel for the shower valve. Did have a sticker on it