Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 01-28-2014, 12:11 PM   #11
Junior Member
 
Join Date: Apr 2013
Posts: 18
Thanks for the help. Turns out that there were not 2 layers of plywood. What I was seeing on the edge was just a piece of 5/8 trim that set into the slots of the rafters for the deck to lay on. I ended up going back with 7/16 OSB ( hope I did not make mistake). Now I have 2 new questions. 1. Does the new EPDM go under the front cap and over the rear cap?. 2. I need to replace the trim pieces that screw down over the front and rear caps to hold them in place, not sure what to buy the old ones were in bad shape with years of crap on them. Is there a part number for them and what are they called? im sorry one more question, does anyone know where I can get a detailed parts catalog for my trailer, Jayco said they only make them available to dealers.
__________________

router343 is offline   Reply With Quote
Old 01-28-2014, 12:54 PM   #12
Senior Member
 
Join Date: Jul 2013
Location: Renton
Posts: 516
I would never use OSB on a roof...unless I had no other choice. If it gets wet it turns into mush.
__________________

__________________
Michael
Old setup:
2004 Chevrolet Silverado 3500 LT with a 2004 Jayco JayFlight 29BHS
2014 Greyhawk 31FS with a 2007 Tahoe toad
New setup:
2014 Thor Palazzo 33.3 with a 2007 Tahoe toad
msturtz is offline   Reply With Quote
Old 01-28-2014, 01:00 PM   #13
Site Team
 
norty1's Avatar
 
Join Date: Jan 2011
Location: Charleston, SC
Posts: 12,056
Not the OSB we use.
__________________
Moderator
2011 351RLTS Eagle, Mor/Ryde suspension & pin box
06 F350 Lariat PSD, SRW, LB, CC, EGR delete kit, 16K DrawTite hitch, Timbrens, TST TPMS

Can't find what you're looking on JOF? Try:Jayco Owners Forum Custom Google Search
"It's easier to fool people than to convince them that they have been fooled." - Mark Twain
norty1 is offline   Reply With Quote
Old 01-28-2014, 02:10 PM   #14
Senior Member
 
John LLRV's Avatar
 
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
The new roof should go under both the front and rear cap. Utilize Lap Sealant along those seams. The trim pieces I can look up, as soon as the Jayco site comes back up (crashed a few hours ago...)
John LLRV is offline   Reply With Quote
Old 01-28-2014, 03:22 PM   #15
Junior Member
 
Join Date: Apr 2013
Posts: 18
Part number I was able to get from Jayco is 0068145, but I searched that part number online and it doesn't come up with anything.
router343 is offline   Reply With Quote
Old 01-28-2014, 06:28 PM   #16
Senior Member
 
John LLRV's Avatar
 
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
Let me plug it into Jayco's part listing tomorrow.
John LLRV is offline   Reply With Quote
Old 01-29-2014, 12:39 PM   #17
Junior Member
 
Join Date: Apr 2013
Posts: 18
seems to be about $17.00 for each 104" piece, but shipping is around $80.00. I guess I will have to just try and straighten and clean the old ones,
router343 is offline   Reply With Quote
Old 01-30-2014, 08:01 AM   #18
Senior Member
 
John LLRV's Avatar
 
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
See if they can cut them into shorter pieces for you. Saves on shipping cost, and since its for the roof, no one will see the seam.
John LLRV is offline   Reply With Quote
Old 01-30-2014, 01:33 PM   #19
Senior Member
 
John LLRV's Avatar
 
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
Valid Part Number... 0068145.. TRIM,FLAT OFFSET 104" NW E2719

Where are you buying these from? I can tell you that the price you found is has over a 50% mark up... before shipping.

John
John LLRV is offline   Reply With Quote
Old 02-05-2014, 08:27 PM   #20
Junior Member
 
Join Date: Apr 2013
Posts: 18
i did not buy any, just trying to clean and straighten the ones i have. Every place i call says they have to order them and shipping is to high for me. Everything is done on the roof other than putting these pieces on. Weather has turn cold again so, i just put a tarp over it for now.
__________________

router343 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.