|
09-04-2014, 06:00 AM
|
#1
|
Senior Member
Join Date: Jul 2014
Location: Home
Posts: 123
|
Silicone spray to slide seals question?
Do you spray inside and outside or just outside?
__________________
2015 Ram 2500 Laramie, MegaCab, 6.4 Hemi with 4.10 with 131,200 miles (19 Aug 2023)
2019 Forest River Forester 3011 DS
2015 Jayflight 28 BHBE (sold)
Equalizer 14,000 lb hitch with 12,000 lb ball and arms (sold)
|
|
|
09-04-2014, 07:25 AM
|
#2
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I use the specific slide seal conditioner and apply by spray then wipe with a disposable brush. The outside is what I only get due to the slides not liking to stop mid way on my unit. Can't hurt if you can get both.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
09-04-2014, 07:26 AM
|
#3
|
Senior Member
Join Date: Jul 2014
Location: Home
Posts: 123
|
Oh, I just bought heavy duty silicone spray from Walmart. I think this should work fine too.
__________________
2015 Ram 2500 Laramie, MegaCab, 6.4 Hemi with 4.10 with 131,200 miles (19 Aug 2023)
2019 Forest River Forester 3011 DS
2015 Jayflight 28 BHBE (sold)
Equalizer 14,000 lb hitch with 12,000 lb ball and arms (sold)
|
|
|
09-04-2014, 12:23 PM
|
#4
|
Senior Member
Join Date: May 2011
Location: Columbus Ohio
Posts: 148
|
Slide out gasket Spray
I use 303 on the rubber gaskets, and anything vinyl on truck or RV. Great stuff, little pricy, but last longer than silicone. Happy Camping, while we can before W I N T E R!
BuckeyeJim
Columbus Ohio
2011 Eagle
Ram Diesel
|
|
|
09-04-2014, 12:47 PM
|
#5
|
Senior Member
Join Date: Dec 2010
Posts: 1,645
|
I use a 100% silicone spray on both sides of the seal. I spray the silicone onto a rag until it is wet and then wipe the seal, re-wetting the rag as needed. I think using a rag conserves the spray, is neater, and gets the seal clean.
__________________
There's lots of advice and information in forums... sometimes it is correct. For example, all of my posts are made by a political appointee who got the job as a reward for contributions to my diesel bill.
2011 Jayco 28.5RLS; 2021 Chevy Duramax; Pullrite Superglide Hitch
|
|
|
09-04-2014, 12:56 PM
|
#6
|
Senior Member
Join Date: Aug 2013
Location: Bellingham,Wa.
Posts: 6,680
|
Quote:
Originally Posted by RVhiker
I use a 100% silicone spray on both sides of the seal. I spray the silicone onto a rag until it is wet and then wipe the seal, re-wetting the rag as needed. I think using a rag conserves the spray, is neater, and gets the seal clean.
|
X2
|
|
|
09-04-2014, 01:36 PM
|
#7
|
Senior Member
Join Date: May 2014
Location: Berlin Center, Ohio
Posts: 195
|
I was told by my dealer the the slide seals never needed anything other than baby powder on them. I haven't heard that mentioned here though. Any thoughts?
|
|
|
09-04-2014, 02:45 PM
|
#8
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Can you use any old silicone spray? I think I have "Liquid Wrench (Gunk) Heavy Duty Silicone Spray Lubricant". I use it for general purpose lube around the RV. Could I spray this on a shop towel (or whatever) and apply it to my seals? Or is there some specific silicone spray I should use?
I've been putting off buying a bottle of 303, but I keep adding things to the list that need to be treated, so I might not be able to hold off any longer. If this silicone spray I already have will work for the slide seals, I could hold off a bit longer...
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
09-04-2014, 07:05 PM
|
#9
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
Quote:
Originally Posted by Camper_bob
Can you use any old silicone spray? I think I have "Liquid Wrench (Gunk) Heavy Duty Silicone Spray Lubricant". I use it for general purpose lube around the RV. Could I spray this on a shop towel (or whatever) and apply it to my seals? Or is there some specific silicone spray I should use?
I've been putting off buying a bottle of 303, but I keep adding things to the list that need to be treated, so I might not be able to hold off any longer. If this silicone spray I already have will work for the slide seals, I could hold off a bit longer...
|
100% Silicone only, no petroleum as it will swell the rubber and break it down. I have used 303, pure silicone and now the seal conditioner.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
09-05-2014, 08:39 AM
|
#10
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
Quote:
Originally Posted by 3'senough
100% Silicone only, no petroleum as it will swell the rubber and break it down. I have used 303, pure silicone and now the seal conditioner.
|
Thanks for the info! That makes sense, and I'm betting that spray has petroleum in it since it's primarily a lubricant. I guess I'll just be patient and wait for the 303.
Do you find the seal conditioner works better? Would you go back to using 303?
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
09-05-2014, 09:20 AM
|
#11
|
Senior Member
Join Date: Sep 2010
Location: New York
Posts: 2,210
|
I don't know. The dealer gave me a can. The 303 goes on everything else vinyl, plastic and tires. 303 holds up well, but does streak after rains.
__________________
2014 375 BHFS Eagle Premier
2014 Ram 3500 Longhorn DRW CC
6.7 CTD, Aisin, 4.10's
Yamaha EF3000iSEB
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|