Slide issues

[Rdogg]

Hello first time here first jayco and trailer with a slide its a jay feather 22rb the slide is extremely off won't close all the way because it's hitting the guttervabove it and it grinds and vibrates like crazy when closing and opening its brand new what would cause because it did not do thus at the dealer any help would be great I attached some pics if you look at the left side on top looks ok the right is higher

[Rustic Eagle]

Rdogg,

Welcome to JOF

Since it's brand new, and with the symptoms you described, IMO it would be best to contact your dealer and setup an appointment for a Warranty Service Repair.

Best to have a paper trial in the Jayco system when experiencing new slide issues.

Bob

[Shokyle1]

If it is rack and pinion style there is a way to adjust the height. I would check out some u tube videos. Or like what was already said take it back in for warranty.

[Rdogg]

That's what I am doing going in on Monday it just sucks just got it just wanted to see what others say to maybe learn so.ething so I can fix it on the road if something does happen again

[Rustic Eagle]

Originally Posted by Rdogg

snip.......so I can fix it on the road if something does happen again

I would confirm with your RV dealer on Monday the slide manufacture & style of slide you have for future reference. If it's confirmed you have a Lippert "Through-Frame" style slide, then the following Lippert (LCI) link may be helpful in the future for 'minor' adjustments:

https://lci-support-doc.s3.amazonaws...cd_0001612.pdf

Also, while at your RV dealer have the tech show you the location of the access panel for the slide motor. If there isn't an access panel, then have them put one in...., most Jayco TT's (w/Lippert Through-Frame slide) come from the factory with one.

Bob

[Rdogg]

Ok will do thanks for the help much appreciated