Stop trailer from shaking when parked

[kevine1979]

Originally Posted by WeRJuliian

I'm also looking to get some telescoping supports from Camco, to go under our bunk ends.)

Which Camco supports are you referring to?

[havnfun]

You might also look at the SteadyFast Stabilizing System. I installed a set on my 5er and it's mostly rock solid now. Priced similar to JTs but only 3 long stabilizers (2 in front, 1 in back) instead of 6 on JTs, which makes setup and break down easier.
Bought a new set off ebay for $150 shipped.

Happy RVing,
Jeff

[blujay40]

We use the same setup regardless of whether we are doing a long weekend or seasonal stay. On our Eagle 330RSTS TT, it takes quite a bit to get it solid.

4 facet approach:

1. Electric Stabilizers mitigates front and rear bounce.
2. JT Strongarms mitigates side to side
3. X-Chocks between the tires mitigates front to back
4. Small scissor jacks under the stairs mitigates suspension bounce when entering/exiting or just walking up and down the hallway.

[smithmdsmith]

I have 4 extra stabilizer/scissor jacks on my Jayco. Two are in front of the front axle and two are behind the rear axle. Without the extra jacks, I could feel our 5-pound chihuahua walking in the trailer and kids shifting in bunks. With the extra jacks, the walking dog and most people movements really go unnoticed. However, my 12 year-old doing gymnastics in the rear bunk room can still be felt.

[kdduke]

Originally Posted by ogione1

We have a 2020, 27' RLS. When we set up and start moving around inside the trailer shakes when someone moves, walks etc. Are there stabilizers you can buy to prevent this?

Thanks

I own mine for 2 years now, and the same issue? On my 2017 321 RSTS, I wish Jayco went with 6 self levelling jacks not just the 4. I added slide supports, chocks between the tires and a front hitch stabilizer and still shakes? I even added a slide stabilizer under rear bumper tow hitch. All those help but still shakes. I have the Morrayde suspension and not sure about that setup. Looked at a Grand Design Solitude that had only its frt. landing jacks down and solid! I guess its all in the quality of the build ! Very disappointed as well.

[kdduke]

5 lb dog! Wow! another Quality built Jayco! LOL! great great Deal on a 321 RSTS if anyone interested!

[icr21801]

Originally Posted by ogione1

We have a 2020, 27' RLS. When we set up and start moving around inside the trailer shakes when someone moves, walks etc. Are there stabilizers you can buy to prevent this?

Thanks

Look at SteadyFast.
Awesome system.

[CoMaddMax]

Take a look at The Rock stabilizer. 3 grades, Heavy $300 Medium $200 and Light is $100.
Here is the link to the post here: https://www.jaycoowners.com/forums/f...iew-63257.html Email is
jim holes <jim_daddie@hotmail.com> Less expensive is Mo Better!

[Duke4857]

Originally Posted by twmarrs

This will fix your problems 2 8 foot 2x4's 2 12 foot ratchet straps 4 eye bolts.

I don't know how to put in pictures??

I think this is what twmarrs is talking about:

Wobble Stopper | Trailer Life

[denn888]

We use the homemade stabilizers, works well, I put them near the steps which lessened the diving board effect on the steps, I'll probably get the x-chocks to reduce foward and back movement, I'm still experimenting with best placement of the stabilizers

[StevieJ]

I use JT Strongarms, X-chocks and as an added bonus, I swapped out the entry stairs on our 2014 27DSRL for Solid Steps and eliminated almost all movement in the trailer. Those steps made a huge difference as I watched the hanging keys at the door to observe movement. Almost none after swapping out those steps.

Capt StevieJ

[Patchesrv]

Wish someone could fix ours. We have levellers because we hated shaking in TT. Still shakes to much for me

[luigi]

Take a look at SteadyFast they work great, 0 movement when set up

[Rdubya44]

So, after trying many devices over the years, we've found a process that works well for us once we're in our spot and disconnected from TV.
1. Position basic wheel chocks using a mallet to secure them as much as possible (easy)
2. Level trailer front to rear using power jack (easy).
3. Level trailer side to side using stabilizer Jack's & 2x6 blocks under each jack (easy to moderate. Sometimes difficult &#128521.
4. Make sure power jack is securely positioned on it's block.
5. Install x-chocks between wheels on both sides so they are very snug. Be careful not to overtighten as it will bend the arms on the wide stance x-chock. Check chocks a few hours later (or the next morning) and tighten if necessary.

This works well for us and removes 80-90% of the shake. And after a few adult beverages, you don't even notice it!

For longer stays or if we're on soft ground or an uneven site, these are highly effective:

https://www.valterra.com/product/rv-...iversal-boxed/

When used with x-chocks as described above will remove close to 100% of the shake. They're made of lightweight aluminum, are easy to wipe clean and have their own storage bags. If we're on gravel or soft ground, we place a 2x6 under them so they're resting on a level surface.

[oldbat]

We have about three packs of those plastic lego type leveling blocks. We use some of them under the scissor jacks, so not to hyper-extend those. We also place some under the bottom step, so when you step on it, it no longer bounces. We also have x-chocks between the wheels. We still felt side to side movement. Before breaking the budget on those integrated stabilizers that attach to the scissor jacks, we decided to try the hack where you use 2x4's and ratchet straps at the front and rear of the camper. This works on the same principle as the expensive integrated ones and works ridiculously well. It's worth the extra 10 minutes to put them on when we are staying at a campsite for more than one night. There is a video on Youtube on how to make them. I think it's called $16 rock solid RV stabilizers. I painted mine black and put pads on the bottom for dollar store solar lights.

[Noah's 2x2]

Here is a simple way I eliminated all movement.



4x4 posts that are 24" long with a handle. The can also double as a chock.[ATTACH][/ATTACH]

[mikegray]

The trouble with these is if you have anything attached to your rear bumper, you can't use them??
Mike

[Rdubya44]

They bracing pieces butt up to the rear and front cross member of the RV frame. The bumper is not designed to support that much weight and would damage it if the support is installed to the bumper.

[burgiebill]

Originally Posted by twmarrs

Don't buy wait until I get home tonight or at lunch and I'll show you the best way to fit the problem for lees than $25.00 and 30 minutes of your time...

No fair, how do we get to see the fix?

[Noah's 2x2]

Using a drill/socket I lower the scissor jacks down to gently rest on
the 4x4 blocks, thus removing any movement. There is no lifting the
trailer, just firming it up.